DatasheetsPDF.com

TDA6501TT Dataheets PDF



Part Number TDA6501TT
Manufacturers NXP
Logo NXP
Description 5 V mixer/oscillator and synthesizer for PAL and NTSC standards
Datasheet TDA6501TT DatasheetTDA6501TT Datasheet (PDF)

INTEGRATED CIRCUITS DATA SHEET TDA6500TT; TDA6501TT 5 V mixer/oscillator and synthesizer for PAL and NTSC standards Product specification 2003 Jun 05 Philips Semiconductors Product specification 5 V mixer/oscillator and synthesizer for PAL and NTSC standards CONTENTS 1 2 3 4 5 6 7 8 9 FEATURES APPLICATIONS GENERAL DESCRIPTION ORDERING INFORMATION BLOCK DIAGRAM PINNING FUNCTIONAL DESCRIPTION LIMITING VALUES THERMAL CHARACTERISTICS 10 11 12 13 14 15 16 17 18 TDA6500TT; TDA6501TT CHARACTERISTIC.

  TDA6501TT   TDA6501TT



Document
INTEGRATED CIRCUITS DATA SHEET TDA6500TT; TDA6501TT 5 V mixer/oscillator and synthesizer for PAL and NTSC standards Product specification 2003 Jun 05 Philips Semiconductors Product specification 5 V mixer/oscillator and synthesizer for PAL and NTSC standards CONTENTS 1 2 3 4 5 6 7 8 9 FEATURES APPLICATIONS GENERAL DESCRIPTION ORDERING INFORMATION BLOCK DIAGRAM PINNING FUNCTIONAL DESCRIPTION LIMITING VALUES THERMAL CHARACTERISTICS 10 11 12 13 14 15 16 17 18 TDA6500TT; TDA6501TT CHARACTERISTICS APPLICATION INFORMATION INTERNAL PIN CONFIGURATION PACKAGE OUTLINE SOLDERING DATA SHEET STATUS DEFINITIONS DISCLAIMERS PURCHASE OF PHILIPS I2C COMPONENTS 2003 Jun 05 2 Philips Semiconductors Product specification 5 V mixer/oscillator and synthesizer for PAL and NTSC standards 1 FEATURES TDA6500TT; TDA6501TT • Single-chip 5 V mixer/oscillator and synthesizer for TV and VCR tuners • I2C-bus protocol compatible with 3.3 V and 5 V microcontrollers: – Address + 6 data bytes transmission – Address + 1 status byte (I2C-bus read mode) – Four independent I2C-bus addresses. • Two PMOS open-drain ports with 5 mA source capability to switch high band and FM sound trap (P2 and P3) • One PMOS open-drain port with 20 mA source capability to switch the mid band (P1) • One PMOS open-drain port with 10 mA source capability to switch the low band (P0) • Five step, 3-bit Analog-to-Digital Converter (ADC) and NPN open-collector general purpose port with 5 mA sinking capability (P6) • NPN open-collector general purpose port with 5 mA sinking capability (P4) • Internal AGC flag • In-lock flag • 33 V tuning voltage output • 15-bit programmable divider • Programmable reference divider ratio: 64, 80 or 128 • Programmable charge pump current: 60 or 280 µA • Varicap drive disable • Balanced mixer with a common emitter input for the low band (single input) • Balanced mixer with a common base input for the mid and high bands (balanced input) • 2-pin asymmetrical oscillator for the low band • 2-pin asymmetrical oscillator for the mid band • 4-pin symmetrical oscillator for the high band • Frequency ranges: see Table 1 • IF preamplifier with asymmetrical 75 Ω output impedance to drive a SAW filter (500 Ω/40 pF) • Wide-band AGC detector for internal tuner AGC: – Five programmable take-over points – Two programmable time constants. 2 APPLICATIONS • TV and VCR tuners • Specially suited for switched concepts, all systems • Specially suited for strong off-air reception. 2003 Jun 05 3 Philips Semiconductors Product specification 5 V mixer/oscillator and synthesizer for PAL and NTSC standards 3 GENERAL DESCRIPTION TDA6500TT; TDA6501TT The synthesizer consists of a 15-bit programmable divider, a crystal oscillator and its programmable reference divider and a phase/frequency detector combined with a charge pump, which drives the tuning amplifier including 33 V output. Depending on the reference divider ratio (64, 80 or 128) the phase comparator operates at 62.50 kHz, 50.00 kHz or 31..



Similar Datasheet



TDA6500TT << | TDA6501TT | >> TDA6502


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)