DatasheetsPDF.com

TDA4687 Dataheets PDF



Part Number TDA4687
Manufacturers NXP
Logo NXP
Description Video processor
Datasheet TDA4687 DatasheetTDA4687 Datasheet (PDF)

INTEGRATED CIRCUITS DATA SHEET TDA4687 Video processor with automatic cut-off control Product specification Supersedes data of May 1993 File under Integrated Circuits, IC02 1997 Jun 23 Philips Semiconductors Product specification Video processor with automatic cut-off control FEATURES • Operates from an 8 V DC supply • Black level clamping of the colour difference, luminance and RGB input signals with coupling-capacitor DC level storage • Two analog RGB inputs, selected either by fast switch .

  TDA4687   TDA4687



Document
INTEGRATED CIRCUITS DATA SHEET TDA4687 Video processor with automatic cut-off control Product specification Supersedes data of May 1993 File under Integrated Circuits, IC02 1997 Jun 23 Philips Semiconductors Product specification Video processor with automatic cut-off control FEATURES • Operates from an 8 V DC supply • Black level clamping of the colour difference, luminance and RGB input signals with coupling-capacitor DC level storage • Two analog RGB inputs, selected either by fast switch signals or via I2C-bus; brightness and contrast control of both RGB inputs • Saturation, contrast, brightness and white adjustment via I2C-bus • Same RGB output black levels for Y/CD and RGB input signals • Timing pulse generation from either a 2 or 3-level sandcastle pulse for clamping, vertical synchronization and cut-off timing pulses • Automatic cut-off control or clamped output selectable via I2C-bus • Automatic cut-off control with picture tube leakage current compensation • Cut-off measurement pulses after end of the vertical blanking pulse or end of an extra vertical flyback pulse • Ultra-black or nominal black blanking selectable via I2C-bus in clamped output mode • Two switch-on delays to prevent discolouration before steady-state operation • Average beam current and peak drive limiting • PAL/SECAM or NTSC matrix selection via I2C-bus • Emitter-follower RGB output stages to drive the video output stages • I2C-bus controlled DC output e.g. for hue-adjust of NTSC (multistandard) decoders TDA4687 line TDA4661 and the Picture Signal Improvement (PSI) IC, TDA467X, or from a feature module. The required input signals are: • Luminance and negative colour difference signals • 2 or 3-level sandcastle pulse for internal timing pulse generation • I2C-bus data and clock signals for microcontroller control. Two sets of analog RGB colour signals can also be inserted, e.g. one from a peritelevision connector and the other from an on-screen display generator. The TDA4687 includes full I2C-bus control of all parameters and functions with automatic cut-off control of the picture tube cathode currents. It provides RGB output signals for the video output stages. The TDA4687 is a simplified, pin compatible (except for pin 18) version of the TDA4680. The module address via I2C-bus can be used for both ICs; where a function is not included in the TDA4687 the I2C-bus command is not executed. The differences with the TDA4680 are: • No automatic white level control; the white levels are determined directly by the I2C-bus data • RGB reference levels for automatic cut-off control are not adjustable via I2C-bus • Clamping delay is fixed • Only contrast and brightness adjust for the RGB input signals • The measurement lines are triggered either by the trailing edge of the vertical component of the sandcastle pulse or by the trailing edge of an optional external vertical flyback pulse (on pin 18), according to which occurs first. The TDA4686 is like TDA4687 but intended for .


TDA4686 TDA4687 TDA4688


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)