INTEGRATED CIRCUITS
DATA SHEET
TDA3602 Multiple output voltage regulator
Product specification File under Integrated Ci...
INTEGRATED CIRCUITS
DATA SHEET
TDA3602 Multiple output voltage
regulator
Product specification File under Integrated Circuits, IC01 July 1994
Philips Semiconductors
Product specification
Multiple output voltage
regulator
FEATURES Two VP state controlled
regulators (REG1 and REG2)
Regulator 3 operates during load dump or thermal shutdown Multi-function control pin A back-up circuit for
Regulator 3 via a single capacitor Supply voltage of −6 V to 50 V (a voltage of −3 V on VP does not discharge capacitor Cbu) Low reverse current
Regulator 3 Low quiescent current in coma mode HOLD output RESET output (LOW at load dump) High ripple rejection. PROTECTIONS Foldback current limit protection (
Regulators 1 and 2) Load dump protection Thermal protection DC short-circuit safe to ground and VP of all
regulator outputs Reverse polarity safe of pin 1 (VP). No high currents are flowing which can damage the IC Capable of handling high energy on the
regulator outputs. GENERAL DESCRIPTION
TDA3602
The TDA3602 is a multiple output voltage
regulator, intended for use in car radios with or without a microprocessor. It contains two fixed voltage
regulators with foldback current protection (
Regulators 1 and 2), and one fixed voltage
regulator that also operates during load dump and thermal shutdown. This
regulator can be used to supply a microprocessor. A back-up circuit supplies
Regulator 3 during a short period after the power is cut off (negative field decay o...