Document
TC74VHC139F/FN/FT
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74VHC139F,TC74VHC139FN,TC74VHC139FT
Dual 2-to-4 Line Decoder
The TC74VHC139 is an advanced high speed CMOS 2 to 4 LINE DECODER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology.
It achieves the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation.
The active low enable input can be used for gating or it can be used as a data input for demultiplexing applications.
When the enable input is held High, all four outputs are fixed at a high logic level independent of the other inputs.
An input protection circuit ensures that 0 to 5.5 V can be applied to the input pins without regard to the supply voltage. This device can be used to interface 5 V to 3 V systems and two supply systems such as battery back up. This circuit prevents device destruction due to mismatched supply and input voltages.
Features
• High speed: tpd = 5.0 ns (typ.) at VCC = 5 V • Low power dissipation: ICC = 4 μA (max) at Ta = 25°C • High noise immunity: VNIH = VNIL = 28% VCC (min) • Power down protection is provided on all inputs. • Balanced propagation delays: tpLH ∼− tpHL • Wide operating voltage range: VCC (opr) = 2 V to 5.5 V • Pin and function compatible with 74ALS139
Pin Assignment
Note: xxxFN (JEDEC SOP) is not available in Japan.
TC74VHC139F
TC74VHC139FN
TC74VHC139FT
1G 1 1A 2 1B 3 1Y0 4 1Y1 5 1Y2 6 1Y3 7 GND 8
(top view)
16 VCC 15 2G 14 2A 13 2B 12 2Y0 11 2Y1 10 2Y2 9 2Y3
Weight SOP16-P-300-1.27A SOL16-P-150-1.27 TSSOP16-P-0044-0.65A
: 0.18 g (typ.) : 0.13 g (typ.) : 0.06 g (typ.)
1 2007-10-01
IEC Logic Symbol
TC74VHC139F/FN/FT
1A (2) 1B (3) 1G (1) 2A (14) 2B (13) 2G (15)
1 X/Y 2 EN
0 (4) 1 (5) 2 (6) 3 (7)
(12) (11) (10) (9)
1Y0 1Y1 1Y2 1Y3 2Y0 2Y1 2Y2 2Y3
1A (2) 1B (3) 1G (1) 2A (14) 2B (13) 2G (15)
0 DMUX 1 G0
3
0 1 2
(4) (5) (6)
3 (7)
(12)
(11)
(10)
(9)
1Y0 1Y1 1Y2 1Y3 2Y0 2Y1 2Y2 2Y3
Truth Table
Inputs
Enable
Select
G BA
H XX L LL L LH L HL L HH
X: Don’t care
System Diagram
Outputs
Y0 Y1 Y2 Y3
HHHH L HHH H L HH HH L H HHH L
Selected Output
None Y0 Y1 Y2 Y3
A 2/14 B 3/13
1/15 G
4/12 Y0
5/11 Y1
6/10 Y2
7/9 Y3
Absolute Maximum Ratings (Note)
Characteristics
Symbol
Rating
Unit
Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature
VCC VIN VOUT IIK IOK IOUT ICC PD Tstg
−0.5 to 7.0 −0.5 to 7.0 −0.5 to VCC + 0.5
−20 ±20 ±25 ±75 180 −65 to 150
V V V mA mA mA mA mW °C
Note:
Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current.