SIP Type SSR for Medium Power Control
S102S02 Series S202S02 Series
∗Non-zero cross type is also available. (S102S01 Series/ S202S01 Series)
S102S02 Series S...
Description
S102S02 Series S202S02 Series
∗Non-zero cross type is also available. (S102S01 Series/ S202S01 Series)
S102S02 Series S202S02 Series
IT(rms)≤8A, Zero Cross type SIP 4pin Triac output SSR
■ Description
S102S02 Series and S202S02 Series Solid State Relays (SSR) are an integration of an infrared emitting diode (IRED), a Phototriac Detector and a main output Triac. These devices are ideally suited for controlling high voltage AC loads with solid state reliability while providing 4.0kV isolation (Viso(rms)) from input to output.
■ Features
1. Output current, IT(rms)≤8.0A 2. Zero crossing functionary (VOX : MAX. 35V) 3. 4 pin SIP package 4. High repetitive peak off-state voltage
(VDRM : 600V, S202S02 Series) (VDRM : 400V, S102S02 Series) 5. High isolation voltage between input and output (Viso(rms) : 4.0kV) 6. Screw hole for heat sink
■ Agency approvals/Compliance
1. Recognized by UL508, file No. E94758 (as models No. S102S02/S202S02)
2. Approved by CSA 22.2 No.14, file No. LR63705 (as models No. S102S02/S202S02)
3. Package resin : UL flammability grade (94V-0)
■ Applications
1. Isolated interface between high voltage AC devices and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and valves.
3. Power control in applications such as lighting and temperature control equipment.
Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility fo...
Similar Datasheet