Three quadrant triacs
Philips Semiconductors
Objective specification
Three quadrant triacs guaranteed commutation
GENERAL DESCRIPTION
Passiv...
Description
Philips Semiconductors
Objective specification
Three quadrant triacs guaranteed commutation
GENERAL DESCRIPTION
Passivated guaranteed commutation triacs in a full pack, plastic envelope intended for use in motor control circuits or with other highly inductive loads. These devices balance the requirements of commutation performance and gate sensitivity. The "sensitive gate" E series and "logic level" D series are intended for interfacing with low power drivers, including micro controllers.
BTA216X series D, E and F
QUICK REFERENCE DATA
SYMBOL PARAMETER BTA216XBTA216XBTA216XRepetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current MAX. 600D 600E 600F 600 16 140 MAX. 800E 800F 800 16 140 UNIT
VDRM IT(RMS) ITSM
V A A
PINNING - SOT186A
PIN 1 2 3 DESCRIPTION main terminal 1
PIN CONFIGURATION
case
SYMBOL
T2
main terminal 2 gate
1 2 3
T1
case isolated
G
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VDRM IT(RMS) ITSM PARAMETER Repetitive peak off-state voltages RMS on-state current Non-repetitive peak on-state current full sine wave; Ths ≤ 38 ˚C full sine wave; Tj = 25 ˚C prior to surge t = 20 ms t = 16.7 ms t = 10 ms ITM = 20 A; IG = 0.2 A; dIG/dt = 0.2 A/µs CONDITIONS MIN. -600 6001 16 MAX. -800 800 UNIT V A
I2t dIT/dt IGM VGM PGM PG(AV) Tstg Tj
I2t for fusing Repetitive rate of rise of on-state current after triggering Peak gate current Peak gate voltage Peak gate power Average gat...
Similar Datasheet