SLP-9118B-51

Ordering number : EN6062 SLP-9118B-51 Infrared LED SLP-9118B-51 ø3.1mm red contact type LED lamp Features GaAsP red LED 3.1mmø, round top type lamp Diffused red resin package type The insertion which made it stick to PCB is possible High luminous intensity, high reliability and long life Application : for the general public welfare 0.8 max 1.55 Note : Material -- lron Coating -- Solder Lead center off : ± 0.4 Unit : mm 2 ø4.4 ø3.1 5.5 ± 0.5 10.2 ± 0.5 2 max (not soldered) Absolute Maximum Ratings at Ta=25°C (as per JIS C 7032) Parameter Forward Current *1 Pulse Forward Current *2 Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Soldering Temperature *3 *1 *2 *3 Symbol IF IFP VR PD Topr Tstg Tsol Rating 25 100 3 70 -25 to +80 -30 to +85 260 Unit mA mA V mW °C °C °C 0.5 0.4 29.5 ± 1 0.4 Anode Cathode See forward current derating Pulse width = Max. 10ms Duty ratio = Max. 1 / 10 Max. 5sec., Lead soldering condition : Min. 1.6mm from case (used 1.6mm’t PCB) Electrical / Optical Characteristics at Ta=25°C Parameter Symbol Conditions Min. Typ. Foward Voltage VF IF = 20mA 1.7 2.1 Reverse Current IR VR = 3V Luminous Intensity *4 IV IF = 20mA 8 20 Peak Wave length λP IF = 20mA 630 Line Half Width ∆λ IF = 20mA 40 Capacitance CO VO = 0 F = 1MHz 40 Response Time t 90 *4 Luminous Intensity is measured by J-16 (SONY TEKTRONIX) of which our office possess. Max. 2.8 10 Unit V µA mcd nm nm pF ns SANYO Electric Co.,Ltd. Semiconductor...