SMD99F-5030

SMD99F 5-TAP, TTL-INTERFACED FIXED DELAY LINE (SERIES SMD99F) FEATURES Five equally spaced outputs Designed for surface mounting Low profile (0.175 maximum height) Input & outputs fully TTL interfaced & buffered 10 T2L fan-out capability IN T2 T4 GND 1 4 10 6 7 8 14 12 data 3 ® delay devices, inc. PACKAGES VDD T1 T3 T5 IN N/C N/C T2 N/C T4 GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC N/C T1 N/C T3 N/C T5 Commercial SMD99F-xx Military SMD99F-xxMC2 FUNCTIONAL DESCRIPTION PIN DESCRIPTIONS The SMD99F-series device is a 5-tap digitally buffered delay line. The IN Signal Input signal input (IN) is reproduced at the outputs (T1-T5), shifted in time by an T1-T5 Tap Outputs amount determined by the device dash number (See Table). For dash VCC +5 Volts numbers less than 5025, the total delay of the line is measured from T1 to GND Ground T5. The nominal tap-to-tap delay increment is given by one-fourth of the total delay, and the inherent delay from IN to T1 is nominally 3.5ns. For dash numbers greater than or equal to 5025, the total delay of the line is measured from IN to T5. The nominal tap-to-tap delay increment is given by one-fifth of this number. SERIES SPECIFICATIONS Minimum input pulse width: 40% of total delay Output rise time: 2ns typical Supply voltage: 5VDC ± 5% Supply current: ICCL = 32ma typical ICCH = 7ma typical Operating temperature: 0° to 70° C Temp. coefficient of total delay: 100 PPM/°C DASH NUMBER SPECIFICATIONS Part Number SMD99F-5004 S...