DatasheetsPDF.com

TEA1532P Dataheets PDF



Part Number TEA1532P
Manufacturers NXP
Logo NXP
Description GreenChip SMPS control IC
Datasheet TEA1532P DatasheetTEA1532P Datasheet (PDF)

TEA1532 GreenChip™II SMPS control IC Rev. 01 — 28 May 2004 Preliminary data sheet 1. General description The GreenChip™II is the second generation of green Switched Mode Power Supply (SMPS) controller ICs. Its high level of integration allows the design of a cost effective power supply with a very low number of external components. The TEA1532 can also be used in fixed frequency, Continuous Conduction Mode (CCM) converter designs for low voltage, high current applications. At low power (standby).

  TEA1532P   TEA1532P



Document
TEA1532 GreenChip™II SMPS control IC Rev. 01 — 28 May 2004 Preliminary data sheet 1. General description The GreenChip™II is the second generation of green Switched Mode Power Supply (SMPS) controller ICs. Its high level of integration allows the design of a cost effective power supply with a very low number of external components. The TEA1532 can also be used in fixed frequency, Continuous Conduction Mode (CCM) converter designs for low voltage, high current applications. At low power (standby) levels, the system operates in cycle skipping mode which minimizes the switching losses during standby. The special built-in green functions allow the efficiency to be optimum at all power levels. This holds for quasi-resonant operation at high power levels, as well as fixed frequency operation with valley switching at medium power levels. At low power (standby) levels, the system operates in cycle skipping mode with valley detection. The proprietary high voltage BCD800 process makes direct start-up possible from the rectified universal mains voltage in an effective and green way. A second low voltage BICMOS IC is used for accurate, high speed protection functions and control. The TEA1532 enables highly efficient and reliable supplies to be designed easily. 2. Features 2.1 Distinctive features s s s s Universal mains supply operation (70 V to 276 V AC) High level of integration, resulting in a very low external component count Fixed frequency Continuous Conduction Mode (CCM) operation capability Quasi-Resonant (QR) Discontinuous Conduction Mode (DCM) operation capability. 2.2 Green features s Valley or zero voltage switching for minimum switching losses in QR operation s Cycle skipping mode at very low loads; input power <300 mW at no-load operation for a typical adapter application s On-chip start-up current source. 2.3 Protection features s Safe restart mode for system fault conditions s Zero current switch-on in QR mode s Undervoltage protection (foldback during overload) Philips Semiconductors TEA1532 GreenChip™II SMPS control IC s s s s s IC overtemperature protection (latched) Low and adjustable overcurrent protection trip level Soft (re)start Mains voltage-dependent operation-enabling level General purpose input for latched or safe restart protection and timing, e.g. to be used for overvoltage protection (OVP), output short-circuit protection or system overtemperature protection s Brown-out protection. 3. Applications s Printer adapters and chargers. The device can also be used in all applications that demand an efficient and cost-effective solution up to 250 W. 4. Ordering information Table 1: Ordering information Package Name TEA1532T TEA1532P SO8 DIP8 Description plastic small outline package; 8 leads; body width 3.9 mm plastic dual in-line package; 8 leads (300 mil) Version SOT96-1 SOT97-1 Type number 9397 750 13113 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Preliminary data sheet Rev. 01 — 28 May 2004 2 of 27 P.


TEA1532 TEA1532P TEA1533AP


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)