TDA8941P
1.5 W mono Bridge Tied Load (BTL) audio amplifier
Rev. 02 — 7 April 2000 Product specification
1. General descri...
TDA8941P
1.5 W mono Bridge Tied Load (BTL) audio amplifier
Rev. 02 — 7 April 2000 Product specification
1. General description
The TDA8941P is a single-channel audio power amplifier with an output power of 1.5 W at an 16 Ω load and a 9 V supply. The circuit contains a Bridge Tied Load (BTL) amplifier with an all-
NPN output stage and standby/mute logic. The TDA8941P comes in a 8-pin dual in-line (DIP8) package. The TDA8941P is printed-circuit board (PCB) compatible with all other types in the TDA894x family. One PCB footprint accommodates both the mono and the stereo products.
2. Features
s s s s s s s s s Few external components Fixed gain Standby and mute mode No on/off switching plops Low standby current High supply voltage ripple rejection Outputs short-circuit protected to ground, supply and across the load Thermally protected Printed-circuit board compatible.
c c
3. Applications
s Mains fed applications (e.g. TV sound) s PC audio s Portable audio.
4. Quick reference data
Table 1: VCC Iq Istb Quick reference data Conditions VCC = 9 V; RL = ∞ Min 6 Typ 9 14 Max 18 20 10 Unit V mA µA supply voltage quiescent supply current standby supply current Symbol Parameter
Philips Semiconductors
TDA8941P
1.5 W mono BTL audio amplifier
Quick reference data…continued Conditions THD = 10%; RL = 16 Ω; VCC = 9 V Po = 0.5 W Min 1.2 31 50 Typ 1.5 0.03 32 65 Max 0.3 33 Unit W % dB dB output power total harmonic distortion voltage gain supply voltage ripple rejection
Table 1: Po THD Gv SVRR...