DatasheetsPDF.com

TSI-5.0S4R0P Dataheets PDF



Part Number TSI-5.0S4R0P
Manufacturers Traco Electronic AG
Logo Traco Electronic AG
Description DC/DC Converter
Datasheet TSI-5.0S4R0P DatasheetTSI-5.0S4R0P Datasheet (PDF)

DC/DC Converter TSI-20 Series Features Step-down Converter with very high Efficiency (> 91%) 3.3 VDC or 5.0 VDC Output, up to 6.0 A Fast Transient Response Remote ON/OFF Overload Protection Low Output Noise Standby Current only 100 µA Small SIL- or DIP-Package 2 Year Product Warranty This new generation of step-down converters provides designers with a cost-effective solution for converting a 5 VDC resp. 12 VDC voltage down to 3.3 VDC or to 5 VDC. To achieve highest efficiency, these dc/dc conve.

  TSI-5.0S4R0P   TSI-5.0S4R0P


Document
DC/DC Converter TSI-20 Series Features Step-down Converter with very high Efficiency (> 91%) 3.3 VDC or 5.0 VDC Output, up to 6.0 A Fast Transient Response Remote ON/OFF Overload Protection Low Output Noise Standby Current only 100 µA Small SIL- or DIP-Package 2 Year Product Warranty This new generation of step-down converters provides designers with a cost-effective solution for converting a 5 VDC resp. 12 VDC voltage down to 3.3 VDC or to 5 VDC. To achieve highest efficiency, these dc/dc converters are using adwanced circuit techniques , as amorphous ferrite, solid aluminum capacitors and a synchronous commutation IC. The TSI-20 series needs no further external components to operate within its specifications. A very high efficiency allows operation without additional heatsink. This product finds many applications in distributed powersystems where voltage conversion at the point of load is required. 15/20 Watt Models Ordercode TSI-3.3S3R0 TSI-3.3S3R0F TSI-5.0S3R0 TSI-5.0S3R0F TSI-3.3S6R0P TSI-3.3S6R0FP TSI-5.0S4R0P TSI-5.0S4R0FP Input voltage range Output voltage Output current max. Efficiency typ. Package SIP DIP SIP DIP SIP DIP SIP DIP 4.8 – 13.6 VDC * + 3.3 VDC 3000 mA 91.0 % 6.0 – 16.5 VDC + 5.0 VDC 3000 mA 95.0 % 4.8 – 7.5 VDC * + 3.3 VDC 6000 mA 88.0 % 6.0 – 16.5 VDC + 5.0 VDC 4000 mA 92.0 % * Output adjustable 2.8 to 3.3 VDC www.tracopower.com Page 1 DC/DC Converter TSI-20 Series 15/20 Watt Input Specifications Input current (no load) Input current (at full load) Stand-by current 15 Watt models 20 Watt models 15 Watt models 20 Watt models 1 mA max. 1 mA max. 1350 mA max. (12 Vin) 1800 mA max. (12 Vin) 100 µA typ ± 3.0 % +2.8 VDC to +3.3 VDC ± 0.5 % < 2.0 % 50 mVpk-pk typ. 50 % Load change: Vout over-/undershoot: 50 % Load change: Vout over-/undershoot: 80 µsec typ. 70 mV typ. 100 µsec typ. 130 mV typ. ± 0.01 % / °C constant current >105% 20’000 µF ON = Pin 5 (ON/OFF Pin) to pin 4 (GND) open OFF = Pin 5 (ON/OFF Pin) to pin 4 (GND) short – 10 °C ... +70 °C – 25 °C ... +85 °C 3 % / °C 95 % rel H max. 15 Watt models 20 Watt models >400’000 h @ 40 °C >350’000 h @ 40 °C none 190 kHz typ. (PWM modulation) 5 to 10 Hz amplitude 10 mm pk-pk 10 to 55 Hz acceleration 2 G acceleration 20 G max. time 11 ms 10 g (0.35 oz) 13 g (0.46 oz) max. 230°C max. / 10 sec. Output Specifications Output voltage tolerance Output voltage adjustment (TSI-3.3S only) Regulation – Input variation – Load variation 0 – 100 % Ripple and noise (20 MHz Bandwidth) Transient response time 15 Watt models (with 220 µF output cap.) 20 Watt models (with 2 x 220 µF output cap.) Temperature coefficient Short circuit protection Capacitive load Remote ON/OFF control General Specifications Temperature ranges – Operating – Storage Derating above 50 °C Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217 E) Isolation Input/Output Switching frequency Physical Specifications Vibration Shock Package weight 15 Watt models 20 Watt models Soldering temperature All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TSI-20 Series 15/20 Watt Outline Dimensions mm (inches) SIP package 0.8 (0.03) 50.8 (2.0) 2.0 (0.08) 7.0 (0.28) 36 C/L 19 20.5 (0.807) 6.0 1 2.54 2.54 2.54 2.54 (0.1)(0.1) (0.1)(0.1) 5 14 2.542.54 2.542.54 (0.1) (0.1)(0.1) (0.1) 18 (0 .2 3 6 ) 2.25 (0.09) 3.4 10.16 (0.13) (0.4) 22.86 (0.9) 10.16 (0.4) (0.025 ) 0.64 Pin-Out Pin DIP +V Input (Vcc) +V Input (Vcc) –V Input (GND) –V Input (GND) Remote on/off V Output adj -V Output -V Output +V Output +V Output No function No function SIP +V Input (Vcc) +V Input (Vcc) –V Input (GND) –V Input (GND) Remote on/off V Output adj -V Output -V Output +V Output +V Output No pin No pin 1 2 3 4 0.64 (0.025) DIP package 0.8 (0.03) 50.8 (2.0) (0.1) 5 14 15 2.5 (0.1) 7.0 (0.28) 36 C/L 19 (0.81) 2.6 16 17 18 19 36 2.54 2.54 2.54 2.54 (0.1) (0.1) (0.1) (0.1) 2.54 2.54 2.54 2.54 (0.1) (0.1) (0.1) (0.1) (0.1) 2.6 1 5 14 18 15.24 20.5 (0.6) (0.13) (0.4) (0.9) (0.4) Stand off (0.32) 8.0 Specifications can be changed without notice www.tracopower.com Page 3 (0.1) 2.5 0.64 3.4 10.1 22.8 10.1 0.64 (0.025) (0.025 ) DC/DC Converter TSI-20 Series 15/20 Watt Connections Normal Connection (Standard) 1 +Vin +Vout 17 18 C2 470µF/35V + = – 100 µ F/35V TSI15 series 220 µ F/35V TSI20 series 3 4 5 TSI 15/20 Watt –Vout ON/OFF V Adj. 15 16 14 Remote ON/OFF Connection 1 +Vin +Vout 17 18 C2 470µF/35V + = – 100 µ F/35V TSI15 series 220 µ F/35V TSI20 series 3 4 TSI 15/20 Watt 15 16 14 -V out ON/OFF V Adj. ON/OFF 5 ON = Open OFF = Short Output Voltage Adjustement Connection (TSI-3.3S only) 1 +Vin +Vout 17 18 C2 470µF/35V + = – 100 µ F/35V TSI15 series 220 µ F/35V TSI20 series 3 4 5 TSI 15/20 Watt -Vout ON/OFF V Adj. 15 16 14 VR1 Capacitors: C1 ==> SXE series Mfg. Chemi-Con C2 ==> SH series Mfg. Sanyo OS-CON VR1 = kOhm Vout.


TSI-5.0S4R0FP TSI-5.0S4R0P TSI180B1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)