Rear Wiper Interval/Wipe-Wash Control
U690B
Rear Wiper Interval/Wipe-Wash Control
Description
The bipolar integrated circuit, U690B, is designed with a time c...
Description
U690B
Rear Wiper Interval/Wipe-Wash Control
Description
The bipolar integrated circuit, U690B, is designed with a time coded input for the rear pane wiper application. The length of the input signal determines the mode of operation i.e., intermittent or wipe/ wash; therefore, only one signal line is sufficient from the input switch to the electronic module.
Features
D D D D D D D
Time controlled interval/ wipe-wash Wiper arm’s park position control Interval pause typ. 7 s Dry wiping time typ. 4.4 s Multipurpose frequency comparator Relay driver with Z-diode RC-oscillator determines switching characteristics
D Debounced main signal input D Power-on reset by low-voltage identification D Protection according to ISO / TR 7637–1 (VDE 0839) D Load-dump protection
Applications
Speed or R.P.M. detection
Ordering Information
Extended Type Number U690B Package DIP8 Remarks
Pin Configuration
Pin 1 2 3 4 5 6 7 8 Symbol GND Output Input Retrigger Program OSC Hyst Vstab Function Ground Relay control output Signal input Retrigger Program input RC-oscillator Hysteresis output Supply voltage 7.3 V GND Output 1 8 Vstab Hyst
2
7
Input Retrigger
3
6
OSC Program
4
94 9328
5
Figure 4. Pinning
TELEFUNKEN Semiconductors Rev. A2, 28-Apr-97
1 (9)
U690B
Block Diagram
C2 10 nF R2 47 mF C1 R1 1 kW 15 VBatt 360 kW Hyst 7
OSC
6
Vstab 8
Oscillator
Stabilization Power-on-Reset Load-dump detection
1 GND 53
VBatt 15 Frequency comparator R4 180 kW 2 Debouncing Logic Relay output Relay ou...
Similar Datasheet