Single-ended Bus Transceiver
Features
• • • • • • • •
Wide Power Supply Voltage Range Short-circuit Protected K-interface, ISO9141 Compatible Three S...
Description
Features
Wide Power Supply Voltage Range Short-circuit Protected K-interface, ISO9141 Compatible Three Short-circuit Protected 40-mA Open-collector Buffers All Low-power Outputs with Built-in 28-V Clamping CMOS Compatible Digital Inputs with Hysteresis Digital 1-mA Push-pull "RxD" K-line Output Channel-specific Over-temperature Switch Off in Event of Short Circuit Load-dump Protection and Interference Protection According to ISO 7637-1/4 (DIN 40839)
Description
The U6812B is a bipolar monolithic K-line bus transceiver designed to provide bi-directional serial communication in automotive diagnostic applications. The standard K-line is ISO 9141 compatible for baud rates up to 250 kBaud. The IC provides three universally applicable 40-mA open-collector buffers, that can be used for signal decoupling. The U6812B is manufactured using Atmel’s bipolar process and fully complies to automotive industry specifications.The U6812B provides an ideal grouping of SO-packaged low-power drivers, thus meeting customers’ demand for space-saving and cost-effective circuit board assembly.
Single-ended Bus Transceiver with Triple Buffer U6812B
Figure 1. Block Diagram
VS VCC
VS
K-diagnosis ISO 9141
K
VS/2
TXD
VCC
TXD
VCC/2
GND
OUT 1 IN 1
VCC/2 VCC
GND
Temperature control
IN 2
OUT 2
GND DIS OUT 3 IN 3 GND
Rev. 4760A–AUTO–10/03
Pin Configuration
Figure 2. Pinning SO16
16 15 14 13 GND K TXD RXD
GND OUT 2 IN 2 DIS VCC IN 3 OUT 3 GND
1 2 3 4
U6812B
5 6 7 8 12 VS
11 IN...
Similar Datasheet