Video Equalizing Amplifier with Clipping and Clamping
Video Clipping and Clamping DAsAnalog Video GearRossGear
Leitch Compatible
Ross Video
85
VCA-7010 GVG Compatible VE...
Description
Video Clipping and Clamping DAsAnalog Video GearRossGear
Leitch Compatible
Ross Video
85
VCA-7010 GVG Compatible VEA-7506
Precision equalization of up to 305m (1,000 ft.) of coax cable 8 outputs (6 output mode selectable on the VEA-7506) Versions available for many popular cable types White Clipper with hard and soft modes Back porch clamping with 2 speeds Delay adjustable +/- 2 degrees Delay matched for precise interchangeability Differential input with excellent common-mode rejection Excellent isolation between outputs Power to each card is individually fused Superb technical specifications 5-year transferable warranty VCA-7010 is an alternative to the Leitch VDP-683-CLP VCA-7010 fits Ross 7000 series and Leitch 680 series frames VEA-7506 is an alternative to the GVG 8506
7 8
Video Equalizing Amplifier with Clipping and Clamping
For use where clamping and white clipping is required in addition to precision cable equalization.
The basic amplifier equalizes Belden 8281 cable but several versions for other cable types are available at no extra charge. The back porch clamping speed is adjustable. Fast mode offers excellent hum rejection (>45 dB) while Normal mode provides good hum rejection (>33 dB) with superior immunity to noise. An adjustable white clipper is included to limit peak white signal excursions and protect the following equipment from overload. Two clipping modes are available. Flat mode causes all frequencies to be clipped equ...
Similar Datasheet