Press-fit Cage for Small Form-factor Pluggable (SFP) Transceiver
Fiber Optics
Press-fit Cage for Small Form-factor Pluggable (SFP) Transceiver
V23838-S5-N1 V23838-S5-N1-BB
Features •...
Description
Fiber Optics
Press-fit Cage for Small Form-factor Pluggable (SFP) Transceiver
V23838-S5-N1 V23838-S5-N1-BB
Features 3D foot design for improved press-fit retention and contact to host board holes One-piece, stainless steel construction Low emission design via fold-back spring fingers – no openings for radiation to pass through Enhanced transceiver kick-out springs Simple and fast installation/removal Host board holes not damaged when cage is removed Heat transfer windows on all SFP cage surfaces Supports MSA compliant host board layouts and transceiver designs
V23838-S5-N1
File: 1142
V23838-S5-N1-BB
File: 1143
Part Number V23838-S5-N1 V23838-S5-N1-BB
Data Sheet
Description For single-sided mounting For double-sided "belly to belly" mounting (see Figure 3)
1 2003-08-07
V23838-S5-N1 V23838-S5-N1-BB
Description Description Infineon is offering its cage for Small Form-factor Pluggable (SFP) transceivers with one of the most rigid mechanical designs available on the market. The cage is designed for press fit applications in order to reduce high volume manufacturing effort. Externally bent bezel contact springs and one-piece construction enhance EMI performance. Application Notes Testing of rear connector may take place before SFP Cage is installed onto host board SFP cage mounting holes should be plated with HASL, gold, or immersion silver finish per MSA dimensional recommendations For double-sided mounting, host board thickness is .118 in [3.0 mm] ...
Similar Datasheet