Parallel Fiber Optic Transceiver (4 + 4) x 2.7 Gbps
ZL60301 Parallel Fiber Optic Transceiver (4 + 4) x 2.7 Gbps
Data Sheet
June 2004
Ordering Information ZL60301/MJD Paral...
Description
ZL60301 Parallel Fiber Optic Transceiver (4 + 4) x 2.7 Gbps
Data Sheet
June 2004
Ordering Information ZL60301/MJD Parallel Fiber Transceiver
Heat sink and EMI shield options are available upon request 0 ° C to +80° C
Features
Complies with POP4 MSA specification 4 Transmit channels and 4 Receive channels Data rate up to 2.7 Gbps per channel 850 nm VCSEL array Data I/O is CML compatible with DC blocking capacitors Link reach 300 m with 50/125 µm 500 MHz.km fiber at 2.5 Gbps Channel BER better than 10-12
Industry standard MPO/MTP ribbon fiber connector interface Pluggable MegArray® ball grid array connector Optionally available with EMI shield and external heat sink Laser class 1M IEC 60825-1:2001 compliant Low power consumption, max 1 W Power supply 3.3 V
Rx_EN Rx_SD SQ_EN
VCCA Rx
VCCB Rx VEE Rx
DOUT0+ DOUT0DOUT3+ DOUT3DIN3+ DIN3-
TransImpedance and Limiting Amplifier
RX0 0
PIN Array
RX1 1
2 RX2 3 RX3 3TX3 2TX2 1 TX1 0 TX0
VCSEL Driver
VCSEL Array
DIN0+ DIN0VCSEL Driver Controller
Tx_EN
Tx_DIS
RESET
FAULT
VCC Tx
VEE TX
Figure 1 - Transceiver Block Diagram 1
Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2004, Zarlink Semiconductor Inc. All Rights Reserved.
ZL60301
Applications
High-speed interconnects within and between switches, routers and transport equipment Proprietary backplanes Interconnects rack-to-rack, shelf-to-shelf, board-to-board...
Similar Datasheet