OMC507

OMC507 FULL-FEATURED CIRCUIT BOARD ASSEMBLY FOR DIRECT DRIVE OF 3-PHASE BRUSHLESS DC MOTO R S 5 Amp. Push-Pull 3-Phase Brushless DC Motor Controller/Driver Circuit Board FEATURES Fully integrated 3-Phase Brushless DC Motor Control System 5A Average Phase Current (10A peak) with 30V Maximum Bus Voltage Onboard Current Sense Resistor Direction and Torque Control Tachometer Output Fits Inside Motor Housing APPLICATIONS Fans and Pumps Hoists Actuator Systems DESCRIPTION The OMC507 is a three phase brushless DC Motor Controller Driver. The OMC507 is a 2 quadrant controller and provides control of motor current (torque) in proportion to the input current command. The versatility of the OMC507 allows the user to either provide an analog or a TTL PWM current command signal externally, or to set an analog current command onboard. The OMC507 also allows the user to adjust the current command offset onboard through the use of a potentiometer. Loop compensation is provided onboard and loop compensation component values can be modified to meet specific customer requirements, thereby optimizing the controller for each application. The OMC507 controller utilizes surface mount and through hole technology. The OMC507 is a mere 2 1/2 inches in diameter and can fit inside the motor housing. A connector for the control section is optional; consult the factory. 9 04 R0 205 Crawford Street, Leominster, MA 01453 USA (978) 534-5776 FAX (978) 537-4246 Visit Our Web Site at www...