Document
MILITARY DATA SHEET MNLM711AM-X REV 1A0
Original Creation Date: 10/26/95 Last Update Date: 11/10/95 Last Major Revision Date: 10/26/95
DUAL HIGH SPEED DIFFERENTIAL COMPARATOR
General Description
The LM711 is a dual differential voltage comparator featuring high accuracy, fast response times, large input voltage range, low power consumption and compatibility with practically all integrated logic forms. When used as a sense amplifier, the threshold voltage can be adjusted over a wide range, almost independent of the integrated circuit characteristics. Independent strobing of each comparator channel is provided, and pulse stretching on the output is easily accomplished. Other applications of the dual comparator include a window discriminator in pulse height detectors and a double ended limit detector for automatic Go-No-Go test equipment.
Industry Part Number
LM711AM
NS Part Numbers
LM711AMH/883 LM711AMJ/883 LM711AMW/883
Prime Die
LM711AM
Processing
MIL-STD-883, Method 5004
Subgrp Description
1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at
Temp ( oC)
+25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55
Quality Conformance Inspection
MIL-STD-883, Method 5005
1
MNLM711AM-X REV 1A0
MILITARY DATA SHEET
Features
Fast Response Time Low Offset Voltage Low Offset Current Independent Comparator Strobing
2
MNLM711AM-X REV 1A0
MILITARY DATA SHEET
(Absolute Maximum Ratings)
Storage Temperature Range -65 C to 175 C Operating Temperature Range -55 C to 125 C Lead Temperature (Soldering, 60 seconds) 300 C Internal Power Dissipation (Note 1) Can DIP Flatpack Positive Supply Voltage Negative Supply Voltage -7V Peak Output Current 50mA Differential Input Voltage +5V Input Voltage +7V Strobe Voltage 0V to 6V Short Circuit Duration 10s Thermal Resistance ThetaJA H-Package (Still Air) (500LF/Min Air flow) J-Package (Still Air) (500LF/Min Air flow) W-Package (Still Air) (500LF/Min Air flow) ThetaJC H-Package J-Package W-Package Note 1:
350mW 400mW 330mW 14V
211 120 126 70 250 152
C/W C/W C/W C/W C/W C/W
37 C/W 24 C/W 42 C/W
Rating applies to ambient temperatures up to 125 C. Above 125 C ambient, derate linearly at 150 C/W for the Can and Flatpack and 120 C/W for the Dip.
3
MNLM711AM-X REV 1A0
MILITARY DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc+ = 12V, Vcc- = -6V SYMBOL Vio PARAMETER Input Offset Voltage CONDITIONS Vcc- = -7V, Rs = 200 Ohms, Vcm = +5V NOTES 1 1 Vcc- = -7V, Rs = 200 Ohms, Vcm = -5V 1 1 Vcm = 0V, Rs = 200 Ohms 1 1 Vcm = 0V, Rs = 50 Ohms 1 1 Iio Input Offset Current Input Bias Current Voltage Gain Vcm = 0V 1 1 Iib Vout = Vol, Vcm = 0V PINNAME MIN -5 -6 -5 -6 -3.5 -4.5 -3.5 -4.5 5 6 5 6 3.5 4.5 3.5 4.5 10 20 75 150 Avs 750 500 Voh Positive Output Level Vin = 10mV, Io = 0mA Vin = 10mV, Io = 5mA Vol OD Vol Negative Output Level Over Driven Negative Output Level Output Sink Current Vin = -10mV, Io = 0mA Vin = 5V, Io = 0mA 2.5 2.5 -1 -1 5 5 0 0 MAX UNIT mV mV mV mV mV mV mV mV uA uA uA uA V V V V V V SUBGROUPS 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1 2 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3
Isink
Vin = -10mV, Vo = 0V
0.5 0.12 0.25
mA mA mA 13.3 mA mA 2.5 mA V dB
Icc+ IccIstrobe Vo(ST) CMRR
Power Supply Current Power Supply Current Strobe Current Strobed Output Common Mode Rejection Ratio
Vin = -5mV, Vout = Gnd Vin = -5mV, Vout = Gnd Vin = 10mV, Vst = 100mV Vst = .3V Vcc- = -7V, Vcm = +5V, Rs = 200 Ohms
2 2 -6.1
-1 80
0
4
MNLM711AM-X REV 1A0
MILITARY DATA SHEET
Graphics and Diagrams
GRAPHICS# 5970HRA2 6202HRA1 6209HRA1 8356HRA1 H10CRF J14ARH P000030A P000110A P000111A W10ARG DESCRIPTION 10LD .230DIA PC TO-100 METAL CAN PKG H (B/I CKT) CERDIP (J), 14 LEAD (B/I CKT) CERPAC (W), 10 LEAD (B/I CKT) 10LD .230DIA PC TO-100 METAL CAN H(B/I CKT) 10LD .230DIA PC TO-100 METAL CAN H(P/P DWG) CERDIP (J), 14 LEAD (P/P DWG) 10LD .230DIA PC TO-100 METAL CAN H(PIN OUT) CERDIP (J), 14 LEAD (PIN OUT) CERPAC (W), 10 LEAD (PIN OUT) CERPAC (W), 10 LEAD (P/P DWG)
See attached graphics following this page.
5
.