SB120S

SB120S THRU SB1B0S SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 100 Volts Forward Current - 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound 1.0 ampere operation at TL=90 with no thermal runaway For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Mechanical Data Case: Molded plastic, A-405 Terminals: Axial leads, solderable per MIL-STD-202, method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.008 ounce, 0.22 gram DIMENSIONS DIM A B C D inches Min. 0.165 0.079 0.020 1.000 Max. 0.205 0.106 0.024 Min. 4.2 2.0 0.5 25.40 mm Max. 5.2 2.7 0.6 Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. Symbols SB 120S SB 130S SB 140S SB 150S SB 160S SB 180S SB 1B0S Units Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375" (9.5mm) lead length at TL=90 Peak forward surge current, IFM (surge): 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum forward voltage at 1.0A Maximum full load reverse current, full cycle average at TA=75 Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 VRRM VRMS VDC I(AV) IFSM VF IR(AV) IR CJ R JA 20 14 20 30 21 30...