www.vishay.com
SBL10L25, SBLF10L25, SBLB10L25
Vishay General Semiconductor
Low VF Schottky Barrier Rectifier
TO-220AC
ITO-220AC
SBL10L25
PIN 1
PIN 2
CASE
2 1
TO-263AB K
2 1
SBLF10L25
PIN 1
PIN 2
FEATURES
• Guardring for overvoltage protection • Low power loss, high efficiency • Very low forward voltage drop • High forward surge capability • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package) • Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AC and ITO-220AC package) • AEC-Q101 qualified • Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
1 SBLB10L25
PIN 1
2
K
PIN 2
HEATSINK
PRIMARY CHARACTERISTICS
IF(AV) VRRM IFSM
VF TJ max.
10 A 25 V 240 A 0.35 V 150 °C
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters and polarity protection application.
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
VRRM
Working peak reverse voltage
VRWM
Maximum DC blocking voltage Maximum average forward rectified current at TC = 135 °C
VDC IF(AV)
Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load
IFSM
Peak repetitive reverse surge current at tp = 2.0 µs, 1 kHz Voltage rate of change (rated VR) Operating junction and storage temperature range
Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min
IRRM dV/dt TJ, TSTG
VAC
SBL10L25 25 18 25 10
240
1.0 10 000 - 65 to + 150
1500
UNIT V
A V/μs °C
V
Revision: 14-Jun-12
1 Document Number: 88723
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
SBL10L25, SBLF10L25, SBLB10L25
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum instantaneous forward voltage Maximum instantaneous reverse current at DC blocking voltage
VF (1) IR (1)
IF = 10 A IF = 10 A IF = 20 A IF = 20 A
Rated VR
TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C TJ = 25 °C TJ = 125 °C
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms
VALUE 0.46 0.35 0.55 0.48 0.80 260
UNIT V mA
THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
SBL
Typical thermal resistance from junction to case per leg
RJC
1.5
SBLF 4.0
SBLB 1.5
UNIT °C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
TO-220AC
SBL10L25-E3/45
ITO-220AC
SBLF10L25-E3/45
TO-263AB
SBLB10L25-E3/45
TO-263AB TO-220AC ITO-220AC TO-263AB TO-263AB
SBLB10L25-E3/81 SBL10L25HE3/45 (1) SBLF10L25HE3/45 1) SBLB10L25HE3/45 (1) SBLB10L25HE3/81 (1)
Note (1) AEC-Q101 qualified
UNIT WEIGHT (g) 1.80 1.94 1.33 1.33 1.80 1.94 1.33 1.33
PACKAGE CODE 45 45 45 81 45 45 45 81
BASE QUANTITY 50/tube 50/tube 50/tube 800/reel 50/tube 50/tube 50/tube 800/reel
DELIVERY MODE Tube Tube Tube
Tape and reel Tube Tube Tube
Tape and reel
Revision: 14-Jun-12
2 Document Number: 88723
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
SBL10L25, SBLF10L25, SBLB10L25
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Average Forward Current (A)
12.5
10
7.5
5
2.5
0 50 100 150 Case Temperature (°C)
Fig. 1 - Forward Current Derating Curve
Junction Capacitance (pF)
10 000
1000
100
10 1
10 100
Reverse Voltage (V)
Fig. 4 - Typical Junction Capacitance
Instantaneous Forward Current (A)
100
TJ = 175 °C
10 TJ = 150 °C
1 TJ = 25 °C
TJ = 100 °C 0.1
TJ = 125 °C
0.01 0
0.1 0.2 0.3 0.4 0.5 0.6 Instantaneous Forward Voltage (V)
0.7
Fig. 2 - Typical Instantaneous Forward Characteristics
1000
100 TJ = 150 °C
TJ = 125 °C 10
TJ = 100 °C
1.0
0.1
0.01 0
TJ = 25 °C
20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%)
Fig. 3 - Typical Reverse Characteristics
Transient Thermal Impedance (°C/W)
100
10
1
0.1 0.01
0.1 1 t - Pulse Duration (s)
10
Fig. 5 - Typical Transient Thermal Impedance
Ins.