DatasheetsPDF.com

SI-3000N Dataheets PDF



Part Number SI-3000N
Manufacturers Sanken electric
Logo Sanken electric
Description Regulator
Datasheet SI-3000N DatasheetSI-3000N Datasheet (PDF)

qSI-3000N Series SI-3000N Series 3-Terminal, Full-Mold, Low Dropout Voltage Dropper Type sFeatures • • • • Compact full-mold package (equivalent to TO220) Output current: 1.0A Low dropout voltage: VDIF≤1V (at IO=1.0A) Built-in foldback overcurrent, overvoltage, thermal protection circuits sApplications • For stabilization of the secondary stage of switching power supplies • Electronic equipment sAbsolute Maximum Ratings Parameter DC Input Voltage DC Output Current Power Dissipation Junction .

  SI-3000N   SI-3000N



Document
qSI-3000N Series SI-3000N Series 3-Terminal, Full-Mold, Low Dropout Voltage Dropper Type sFeatures • • • • Compact full-mold package (equivalent to TO220) Output current: 1.0A Low dropout voltage: VDIF≤1V (at IO=1.0A) Built-in foldback overcurrent, overvoltage, thermal protection circuits sApplications • For stabilization of the secondary stage of switching power supplies • Electronic equipment sAbsolute Maximum Ratings Parameter DC Input Voltage DC Output Current Power Dissipation Junction Temperature Ambient Operating Temperature Storage Temperature Thermal Resistance (junction to case) Thermal Resistance (junction to ambient air) Symbol SI-3050N VIN IO PD1 PD2 Tj Top Tstg Rth(j-c) Rth(j-a) 25 Ratings SI-3090N/3120N 30 1.0*2 14(With infinite heatsink) 1.5(Without heatsink, stand-alone operation) –40 to +125 –30 to +100 –40 to +125 7.0 66.7(Without heatsink, stand-alone operation) SI-3150N 35 V A W W °C °C °C °C/W °C/W Unit (Ta=25°C) 16 qSI-3000N Series sElectrical Characteristics Ratings Parameter Input Voltage SI-3000N *1 Output Voltage SI-3000NA Symbol min. VIN VO Conditions VDIF Dropout Voltage Conditions 1.0 Conditions Line Regulation Load Regulation Temperature Coefficient of Output Voltage Ripple Rejection Quiescent Circuit Current Overcurrent Protection Starting Current*4,5 ∆VOLINE Conditions ∆VOLOAD Conditions ∆VO/∆Ta Conditions RREJ Conditions Iq Conditions IS1 Conditions 1.2 VIN=8V 10 40 ±0.5 VIN=8V, IO=5mA, Tj=0 to 100°C 54 VIN=8V, f=100 to 120HZ 3 VIN=8V, IO=0A 1.2 VIN=12V 10 30 100 18 70 ±1.0 VIN=12V, IO=5mA, Tj=0 to 100°C 54 VIN=12V, f=100 to 120HZ 3 VIN=12V, IO=0A 1.2 VIN=15V 10 VIN=6 to 15V, IO=0.5A VIN=8V, IO=0 to 1.0A 6*3 4.80 4.90 5.00 5.00 SI-3050N typ. max. 15*2 5.20 5.10 0.5 min. 10*3 8.64 8.82 9.00 9.00 SI-3090N typ. max. 20*2 9.36 9.18 0.5 IO≤0.5A 1.0 IO≤1.0A 48 180 24 93 ±1.5 VIN=15V, IO=5mA, Tj=0 to 100°C 54 VIN=15V, f=100 to 120HZ 3 VIN=15V, IO=0A 10 64 240 1.0 min. 13*3 11.52 11.76 12.00 12.00 SI-3120N typ. max. 25*2 12.48 12.24 0.5 (Ta=25°C unless otherwise specified) SI-3150N min. 16*3 14.40 14.70 15.00 15.00 typ. max. 27*2 15.60 15.30 0.5 1.0 Unit V V VIN=8V, IO=0.5A VIN=12V, IO=0.5A VIN=15V, IO=0.5A VIN=18V, IO=0.5A V mV 30 120 ± 1.5 VIN=18V, IO=5mA, Tj=0 to 100°C 54 VIN=18V, f=100 to 120HZ 3 VIN=18V, IO=0A 1.2 VIN=18V A 10 mA 90 300 mV VIN=16 to 27V, IO=0.5A VIN=18V, IO=0 to 1.0A mV/ °C dB VIN=10 to 20V, IO=0.5A VIN=12V, IO=0 to 1.0A VIN=13 to 25V, IO=0.5A VIN=15V, IO=0 to 1.0A *1: "A" may be indicated to the right of the Sanken logo. *2: VIN(max) and IO(max) are restricted by the relation PD(max)=(VIN-VO)•IO=14(W). *3: Refer to the dropout voltage.(Refer to Setting DC Input Voltage on page 7.) *4: IS1 is specified at –5(%) drop point of output voltage VO on the condition that VIN=VO+3V, IO=0.5A. *5: A foldback type overcurrent protection circuit is built into the IC regulator. Therefore, avoid using it for the following applications as it may cause starting errors: (1) Constant current load (.


SI-3000J SI-3000N SI-3000P


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)