SL4518B

SL4518B Dual Up-Counter High-Voltage Silicon-Gate CMOS The SL4518B Dual BCD Up-Counter consists two identical, internally synchronous 4 -stage counters. The counter stages are Dtype flip-flops having interchangeable CLOCK and ENABLE lines for incrementing on either the positive-going or negative-going transition. For single-unit operation the ENABLE input is maintained high and the counter advances on each positive-going transition of the CLOCK. The counters are cleared by high levels on their RESET lines. The counter can be cascaded in the ripple mode by connecting Q4 to the enable input of the subsequent counter while the CLOCK input of the latter is held low. Operating Voltage Range: 3.0 to 18 V Maximum input current of 1 µA at 18 V over full packagetemperature range; 100 nA at 18 V and 25°C Noise margin (over full package temperature range): 1.0 V min @ 5.0 V supply 2.0 V min @ 10.0 V supply 2.5 V min @ 15.0 V supply ORDERING INFORMATION SL4518BN Plastic SL4518BD SOIC TA = -55° to 125° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE Inputs CLOCK ENABLE H L PIN 16=VCC PIN 8= GND X X L H X System Logic Semiconductor Outputs RESET L L L L L L Mode Increment Counter Increment Counter No Change No Change No Change No Change Q1 thru Q4=L X H X = don’t care SLS SL4518B MAXIMUM RATINGS * Symbol VCC VIN VOUT IIN PD PD Tstg TL * Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND...