Dual stage IF amplifier
SL2009
Dual stage IF amplifier for cable tuners
DS5507
ISSUE 1.4
March 2002
Features
• • • • • Single chip solution f...
Description
SL2009
Dual stage IF amplifier for cable tuners
DS5507
ISSUE 1.4
March 2002
Features
Single chip solution for tuner IF gain and AGC Contains 34 dB of AGC shared between two AGC stages Design optimised for high signal handling with low inter-modulation spurious generation I/O ports optimised to interface with standard SAW filters ESD protection (Normal ESD handling procedures should be observed)
Ordering Information SL2009/KG/NP1T (Tape and Reel) SL2009/KG/NP1S (Tubes)
The devices includes two stages of IF gain which are both optimised to interface with inter-stage filters. Both stages contain independent AGC facility, and the first stage contains a level detect for control of the tuner AGC.
Applications
Cable Network interface modules and tuners Data communications systems
IFIP IFIPB VCCIF AGC2 IFOP
1
16
VCCSAW SDRIVEOP SDRIVEOPB AGCOUT AGC1 SDRIVEIP SDRIVEIPB
Description
The SL2009 is a dual IF amplifier intended for application in cable tuners, and integrates all of the IF gain and AGC required to deliver 1Vp-p in a standard tuner configuration.
VEE IFOPB VEE 8 9
AGCBIAS
NP16 Figure 1 - Pin allocation
(12)
AGC1
AGC SENDER
AGC SENDER
AGCBIAS (9) AGCOUT (13)
(11) SDRIVEIP (10) SDRIVEIPB (15) SDRIVEOP
SAW Driver VccSAW (16) Vee (6,8) VccIF (3)
(14) SDRIVEOPB
(1) IFIP (2) IFIPB
AGC
IFOP (5) IFOPB (7)
(4) AGC2
SENDER
Figure 2 - Block diagram
1
SL2009
Characteristics SAWF driver stage Input operating range Input NF, referred to 2kΩ OPIP3 Gai...
Similar Datasheet