OSD PROCESSOR FOR MONITORS
JAN. 2000
DATA SHEET
S5D2501F
OSD PROCESSOR FOR MONITORS
S5D2501F
OVERVIEW
The S5D2501F is used to display some char...
Description
JAN. 2000
DATA SHEET
S5D2501F
OSD PROCESSOR FOR MONITORS
S5D2501F
OVERVIEW
The S5D2501F is used to display some characters or symbols on a screen of monitor. Basically, the operation is to control the internal memory on chip and generate the R,G,B signals for some characters or symbols. The R,G,B signals are synchronized with the horizontal sync. Then the R,G,B signals are mixed with the main video signal in the Video Amp IC. The font data for characters or symbols are stored in the internal ROM. This stored data are accessed and controlled by the control data from a micro controller. The control data are transmitted through the I2C bus. All timing control signals including the system clock are synchronized with the horizontal sync. Therefore there is a PLL circuitry on chip. 24-DIP-300
FEATURES ORDERING INFORMATION
Build in 1K-byte SRAM 464 ROM fonts (448 standard fonts + 16 Multi-color fonts) Full Screen Memory Architecture Wide range PLL available (15 kHz — 120 kHz) Programmable vertical height of character Programmable vertical and horizontal positioning Character color selection up to 16 different colors Programmable background color (Up to 16 colors) Character blinking, bordering and shadowing Color blinking Character scrolling Fade-in and fade-out Row to row spacing control Window outline and shadowing Box drawing Character sizing up to four times 8 PWM DAC channels with 8-bit resolution 96 MHz pixel frequency from on-chip...
Similar Datasheet