Dual OP AMP
F
Semiconductor
S4580P
Dual OP AMP
Description
S4580P is the dual operational amplifier, specially designed for impro...
Description
F
Semiconductor
S4580P
Dual OP AMP
Description
S4580P is the dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. Featuring noiseless, higher gain bandwidth, high output current and low distortion ratio, and it is most suitable not only for acoustic electronic parts of audio pre-amp and active filter, but also for the industrial measurement tools. It is also suitable for the head phone amp at higher output current, and further more, it can be applied for the handy type set operational amplifier of general purpose in application of low voltage single supply type which is properly biased of the input low voltage source.
Features
Operating voltage. Low input noise voltage. Wide gain bandwidth product. Low distortion. Slew rate. (±2V ~ ±18V) (0.8 ㎶ rms typ.) (15MHz typ.) (0.0005% typ.) (5V/㎲ typ.)
Ordering Information
Type NO. S4580P Marking S4580P Package Code SOP-8
Outline Dimensions
unit :
mm
Block Diagram
KSI-L012-000
1
S4580P
Absolute maximum ratings
Characteristic
Supply voltage Differential input voltage Input voltage Output current Power Dissipation Operating temperature Storage temperature (Ta = 25 °C)
Symbol
VCC VID VIC(note) IO PD Topr Tstg
Ratings
±18
Unit
V V V mA mW
°C °C
±30 ±15 ±50 800 -40 ~ +85 -40 ~ +125
(note) For supply voltage less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
Electrical Characteristics
(Unless otherwise spec...
Similar Datasheet