Document
TECHNICAL DATA
IN74ALS240A
OCTAL BUFFER / DRIVER WITH 3-STATE OUTPUTS
This octal buffer/driver is designed specially to improve both the performance and density of 3-state memory address drivers, clock drivers and busoriented receivers and transmitters. When this device is used with the ‘ALS241, ‘AS241A, ‘ALS244 and AS244A, the circuit designer has a choice of selected combinations of inverting and noninverting outputs, symmetrical active-low output-enable (OE) inputs and complementary OE and OE inputs. This device features high fan-out and improved fan-in. The IN74ALS240A is characterized for operation from 0oC to 70oC.
ORDERING INFORMATION IN74LS240AN Plastic IN74ALS240AD SOIC TA = 0° to 70° C for all packages
Logic Symbol
Logic Diagram (Positive Logic)
IN74ALS240A
PIN ASSIGNMENT FUNCTION TABLE INPUTS OE L L H A H L X OUTPUT Y L H Z
ABSOLUTE MAXIMUM RATINGS OVER OPERATING FREE-AIR TEMPERATURE RANGE Supply voltage, Vcc Input voltage, VI Voltage applied to a disabled 3-state output Operating free-air temperature range, TA Storage temperature range 7V 7V 5.5V 0oC to 70oC. -65oC to 150oC
RECOMMENDED OPERATING CONDITIONS VCC VIH VIL IOH IOL TA Supply voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Operating free-air temperature MIN 4.5 2 NOM MAX UNIT 5 5.5 V V 0.8 V -15 mA 24 mA o 70 C
0
2
IN74ALS240A
ELECTRICAL CHARACTERISTICS OVER RECOMMENDED OPERATING FREEAIR TEMPERATURE RANGE Parameter VIK VCC = 4.5V VCC = 4.5V to 5.5V VOH VCC = 4.5V VOL VCC = 4.5V Test Conditions II = -18mA IOH = -0.4mA IOH = -3mA IOH = -15mA IOL= 12 mA IOL = 24 mA IOL = 48 mA* VO= 2.7V VO= 0.4V VI = 7V VI = 2.7V VI = 0.4V VO= 2.25V Output high Outputs low Outputs disabled TYP** MAX UNIT -1.2 V VCC-2 V 2.4 3.2 V 2 0.25 0.4 0.35 0.5 V 0.35 0.5 20 µA -20 µA 0.1 mA 20 µA -0.1 mΑ -30 -112 mΑ 4 11 13 23 mΑ 14 25 MIN
IOZH IOZL II IIH IIL IO*** ICC
VCC = 5.5V VCC = 5.5V VCC = 5.5V VCC = 5.5V VCC = 5.5V VCC = 5.5V VCC = 5.5V
*- Applies only to the -1 version and only if VCC is between 4.75V and 5.25V **- All typical values are at VCC=5V, TA=25oC ***- The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS
SWITCHING CHARACTERISTICS VCC = 4.5 V to 5.5 V CL = 50 pF R1= 500 Ω R2= 500 Ω TA = MIN to MAX* MIN 2 2 5 5 2 3 MAX 9 9 13 18 10 12
Parameter From (input)
To (output)
UNIT
tPLH tPHL tPZH tPZL tPHZ tPLZ
A OE OE
Y Y Y
ns ns ns
*- For conditions shown as MIN and MAX, use the appropriate value specified under recommended operating conditions
3
.