Quad 2-input NAND Schmitt trigger
INTEGRATED CIRCUITS
74F132 Quad 2-input NAND Schmitt trigger
Product specification IC15 Data Handbook 1991 Jun 26
Phil...
Description
INTEGRATED CIRCUITS
74F132 Quad 2-input NAND Schmitt trigger
Product specification IC15 Data Handbook 1991 Jun 26
Philips Semiconductors
Philips Semiconductors
Product specification
Quad 2-input NAND Schmitt trigger
74F132
DESCRIPTION
The 74F132 contains four 2-input NAND gates which accept standard TTL input signals and provide standard TTL output levels. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. In addition, they have greater noise margin than conventional NAND gates. Each circuit contains a 2-input Schmitt trigger followed by a Darlington level shifter and a phase splitter driving a TTL totem-pole output. The Scmitt trigger uses positive feedback to effectively speed-up slow input transitions and provide different input threshold voltages for positive and negative-going transitions. This hysteresis between the positive-going and negative-going input threshold (typically 800mV) is determined by resistor ratios and is essentially insensitive to temperature and supply voltage variations. As long as three inputs remain at a more positive voltage than VT+MAX, the gate will respond in the transition of the other input as shown in Waveform 1.
PIN CONFIGURATION
D0a D0b Q0 D1a D1b Q1 GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC D3b D3a Q3 D2b D2a Q2
SF00710
TYPE
TYPICAL PROPAGATION DELAY 6.3ns
TYPICAL SUPPLY CURRENT (TOTAL) 13mA
74F132
ORDERING INFORMATION
DESCRIPTION 14-pin plastic DIP 14-pin plastic ...
Similar Datasheet