16-bit transceiver
INTEGRATED CIRCUITS
DATA SHEET
74AVC16245 16-bit transceiver with direction pin; 3-state (3.6 V tolerant)
Product spec...
Description
INTEGRATED CIRCUITS
DATA SHEET
74AVC16245 16-bit transceiver with direction pin; 3-state (3.6 V tolerant)
Product speciļ¬cation Supersedes data of 1998 Dec 11 File under Integrated Circuits, IC24 1999 Nov 15
Philips Semiconductors
Product speciļ¬cation
16-bit transceiver with direction pin; 3-state (3.6 V tolerant)
FEATURES Wide supply voltage range from 1.2 to 3.6 V Complies with JEDEC standard no. 8-1A/5/7 CMOS low power consumption Input/output tolerant up to 3.6 V Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation Low inductance multiple power and ground pins for minimum noise and ground bounce Power off disables outputs, permitting live insertion. DESCRIPTION
74AVC16245
The 74AVC16245 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74AVC16245 features two output enable inputs (nOE) for easy cascading and two send/receive inputs (nDIR) for direction control. Input nOE controls the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver. This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption. To ensure the high-impedance output state during power-up or power-down, input nOE should be tied to VCC through a pull-up resistor (live insertion). A DCO circuitry is implemented to supp...
Similar Datasheet