Dual 4-input multiplexer
INTEGRATED CIRCUITS
74ALS253 Dual 4–input multiplexer (3–State)
Product specification IC05 Data Handbook 1991 Feb 08
P...
Description
INTEGRATED CIRCUITS
74ALS253 Dual 4–input multiplexer (3–State)
Product specification IC05 Data Handbook 1991 Feb 08
Philips Semiconductors
Philips Semiconductors
Product specification
Dual 4-input multiplexer (3-State)
74ALS253
FEATURES
3-State outputs for bus interface and multiplex operation Common select inputs Separate output enable inputs
DESCRIPTION
The 74ALS253 has two identical 4-input multiplexers with 3-State outputs which select 2 bits from four sources by using common select input (S0, S1). When the individual output enable (OEa, OEb) inputs of the 4-input multiplexers are High, the outputs are forced to a High impedance (Z) state. The 74ALS253 is the logic implementation of 2-pole, 4-position switch being determined by the logic levels supplied to the common select inputs. To avoid exceeding the maximum current ratings when the outputs of the 3-State devices are tied together, all but one device must be in the High impedance state. Therefore, only one output enable must be achieved at a time. TYPICAL SUPPLY CURRENT (TOTAL) 8mA
PIN CONFIGURATION
OEa S1 I3a I2a I1a I0a Ya GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC OEb S0 I3b I2b I1b I0b Yb
SF00798
ORDERING INFORMATION
ORDER CODE DESCRIPTION COMMERCIAL RANGE VCC = 5V ±10%, Tamb = 0°C to +70°C 74ALS253N 74ALS253D 74ALS253DB DRAWING NUMBER
TYPE 74ALS253
TYPICAL PROPAGATION DELAY 7.0ns
16-pin plastic DIP 16-pin plastic SO 16-pin plastic SSOP Type II
SOT38-4 SOT109-1 SOT338-1
INPUT AND OUTPUT ...
Similar Datasheet