Octal buffer
INTEGRATED CIRCUITS
74ALS241A/74ALS241A–1 Octal buffer (3–state)
Product specification IC05 Data Handbook 1991 Feb 08
...
Description
INTEGRATED CIRCUITS
74ALS241A/74ALS241A–1 Octal buffer (3–state)
Product specification IC05 Data Handbook 1991 Feb 08
Philips Semiconductors
Philips Semiconductors
Product specification
Octal buffer (3-State)
74ALS241A/74ALS241A-1
FEATURES
Octal bus interface 3-State buffer outputs sink 24mA and source 15mA The -1 version sinks 48 mA
DESCRIPTION
The 74ALS241A is an octal buffer that is ideal for driving bus lines or buffer memory address registers. The outputs are all capable of sinking 24mA and sourcing up to 15mA, producing very good capacitive drive characteristics. The device features two output enables, OEa and OEb, each controlling four of the 3-State outputs. The 74ALS241A-1 sinks 48mA IOL if the VCC is limited to 5.0V ±0.25V. TYPICAL PROPAGATION DELAY 4.5ns 4.5ns TYPICAL SUPPLY CURRENT (TOTAL) 18mA 18mA
PIN CONFIGURATION
OEa Ia0 Yb0 Ia1 Yb1 Ia2 Yb2 Ia3 Yb3 GND 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 VCC OEb Ya0 Ib0 Ya1 Ib1 Ya2 Ib2 Ya3 Ib3
SF00324
ORDERING INFORMATION
ORDER CODE DESCRIPTION COMMERCIAL RANGE VCC = 5V ±10%, Tamb = 0°C to +70°C 74ALS241AN, 74ALS241A-1N 74ALS241AD, 74ALS241A-1D 74ALS241ADB, 74ALS241A-1DB DRAWING NUMBER
TYPE 74ALS241A 74ALS241A-1
20-pin plastic DIP 20-pin plastic SOL 20-pin plastic SSOP Type II
SOT146-1 SOT163-1 SOT339-1
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS Ian, Ibn OEa, OEb Yan, Ybn Yan, Ybn Data inputs Output Enable inputs (active-Low) Data outputs Data outputs (-1 version) DESCRIPTION 74ALS (U.L...
Similar Datasheet