53225

53225 SOLID-STATE POWER CONTROLLER (SSPC) Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Features: I2t output trip Output trip status 1000 VRMS Isolation Power FET Output Low On-state Resistance Full Military compliance Low control power consumption typical) 125ºC screening available Applications: (3 mA @ 5 V Logic controlled circuit breakers Dynamic load switching Power distribution switch Supply source switching DESCRIPTION The 53225 is a military SPST solid-state relay. This light-weight device is mechanically resistant and electrically immune to contact-related problems inherent in mechanical relays. An I2t current let-through curve assures power supply, relay, and load protection from thermal stress yet provides large momentary currents to charge capacitive loads or start inductive loads. Any current versus time above the I2t curve initiates a trip condition and a status output is generated. Effective isolation of 1000 VRMS is provided from all inputs, case and outputs through magnetic coupling. Magnetic coupling contributes to very low control power, repeatable turn-on/turn-off times, and no output stage currents to provide status signals. Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PR...