2-phase motor driver for VCR cylinder motors
Motor driver ICs
2-phase motor driver for VCR cylinder motors
BA6970FS
The BA6970FS is a direct-drive motor driver suit...
Description
Motor driver ICs
2-phase motor driver for VCR cylinder motors
BA6970FS
The BA6970FS is a direct-drive motor driver suitable for 2-phase, full-wave linear motors. The IC consists of a Hall amplifier control circuit, driver circuits, FG / PG signal amplifiers, and hysteresis amplifiers. FApplications VCR cylinder motors FFeatures 1) Linear drive system provides low switching noise. 2) Output current can be controlled by either current or voltage input. 3) Two amplifiers and two hysteresis amplifiers. FBlock diagram
4) Constant supply voltage pin for hall devices. 5) High ratio of output current and control current. (4000 typically) 6) Available in a compact surface-mount package.
594
Motor driver ICs
FAbsolute maximum ratings (Ta = 25_C)
BA6970FS
FRecommended operating conditions (Ta = 25_C)
595
Motor driver ICs
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 12V)
BA6970FS
596
Motor driver ICs
FPin descriptions
BA6970FS
597
Motor driver ICs
FInput / output circuits (1) ECV (22 pin)
BA6970FS
(4)
I / O of amplifiers 1 and 2
Fig.1
(2)
Coil output (8, 6, 5, 3 pin)
Fig.4
(5)
I / O of hysteresis amplifiers
Fig.2
(3)
Hall inputs (9, 10, 11, 12 pin), ECI input
Fig.5
∗Note that the resistance values can vary ±30%
Fig.3
598
Motor driver ICs
FCircuit operation (1) The signal from the Hall device is amplified by the Hall amplifier and then supplied to the driver circuit. The driver gain, which is constant, is regulated by changing the Ha...
Similar Datasheet