FAR-F5CH

FUJITSU SEMICONDUCTOR DATA SHEET DS04-23112-1E ASSP Mobile Communication Systems Piezoelectric SAW BPF (700 to 1000 MHz) F5CH Series (L2 type) s DESCRIPTION The F5CH series of SAW bandpass filters apply to the frequency range 700 to 1000 MHz. The SAW filters are fabricated on a lithium tantalate (LiTaO3) substrate, producing filters with a wide frequency bandwidth, low insertion loss in passband and superior stability due to the high electromechanical coupling coefficient of the material. The F5CH series filters are housed in a small surface mount package. Moreover, the impedance in the passband is 50 ohms, and so applications require no external matching circuits. The F5CH series SAW filters are suitable for interstage RF filter in mobile communications systems in the frequency range 700 to 1000 MHz. Standard devices are available for AMPS, ETACS, GSM, EGSM, PDC and so on. s FEATURES Low insertion loss and high attenuation High handling power (0.2 Watt) Ultra compact and light package (3.8 mm) External matching circuits are not required. Surface mount package (SMT) Wide variety of standard devices for worldwide mobile communication systems (AMPS, GSM, EGSM, ETACS, PDC800, NTACS, 2 WAY PAGER etc.) s PACKAGE F MD r 11 1 F5CH Series (L2 type) s PIN ASSIGNMENT (Bottom View) (1) (2) (3) (6) (5) (4) s PIN DESCRIPTION Pin No. 1 2 3 4 5 6 Pin name GND IN GND GND OUT GND Ground Pin Input Pin Ground Pin Ground Pin Output Pin Ground Pin Description s ABSOLUTE M...