SAW Duplexer (700 to 1000 MHz)
FUJITSU MEDIA DEVICE DATA SHEET
DS04-23116-2E
ASSP Mobile Communication Systems
SAW Duplexer
(700 to 1000 MHz)
D5CC ...
Description
FUJITSU MEDIA DEVICE DATA SHEET
DS04-23116-2E
ASSP Mobile Communication Systems
SAW Duplexer
(700 to 1000 MHz)
D5CC Series (D1)
s DESCRIPTION
The D5CC series of SAW antenna duplexer apply to the frequency range 700 to 1000 MHz. The SAW filters are fabricated on a piezoelectric-crystal unit (LiTaO3:lithium tantalate) with a large electromechanical dissociation. The D5CC series provides small size and light duplexer by using original design, mounting and electrode formation techniques. D5CC(D1) series are incorporated transmitter filter and receiver filter into a small package and are housed phase circuit in the package. Moreover, I/O of SAW filter is set to impedance 50 Ω, so application requires no external circuits.
s FEATURES
Ultra compact and light package (0.14cm3, 9.5 × 7.5 × 2.0 (h) mm Typ.) External matching circuits are not required. Surface mount package (SMT) High handling power resistance (1.2 W Max.)
s PACKAGE
D5CC Series (D1)
s PIN ASSIGNMENT
(TOP VIEW)
12 11 10 9 8
13 14 15
7
C8 B 01
F
1 2 3 4
6 5
16
(BOTTOM VIEW)
16 1 2 3 4
15 14 13
5 6 7
12
11
10
9
8
2
D5CC Series (D1)
s PIN DESCRIPTION
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin name GND ANT GND GND GND Rx GND GND GND ANT GND GND GND Tx GND GND Ground Pin Antenna Pin* Ground Pin Ground Pin Ground Pin Receiver side Pin Ground Pin Ground Pin Ground Pin Antenna Pin* Ground Pin Ground Pin Ground Pin Transmitter side Pin Ground Pin Ground Pin Description
* : Only one Antenna p...
Similar Datasheet