Dual-power-supply (5 V/12 V) Operation 1/4-type B/W CCD Area Sensor with 320 k Pixels
LZ2426J
LZ2426J
DESCRIPTION
Dual-power-supply (5 V/12 V) Operation 1/4-type B/W CCD Area Sensor with 320 k Pixels
PIN ...
Description
LZ2426J
LZ2426J
DESCRIPTION
Dual-power-supply (5 V/12 V) Operation 1/4-type B/W CCD Area Sensor with 320 k Pixels
PIN CONNECTIONS
14-PIN HALF-PITCH WDIP TOP VIEW
The LZ2426J is a 1/4-type (4.5 mm) solid-state image sensor that consists of PN photo-diodes and CCDs (charge-coupled devices) driven by dualpower-supply. With approximately 320 000 pixels (542 horizontal x 582 vertical), the sensor provides a stable high-resolution B/W normal or mirror image.
ØRS 1 GND 2 OS 3
14 OFD 13 ØTG 12 ØV2 11 ØV1 10 ØV4 9 ØV3 8 ØH1
FEATURES
Number of effective pixels : 512 (H) x 582 (V) Number of optical black pixels – Horizontal : 2 front and 28 rear Pixel pitch : 7.2 µm (H) x 4.7 µm (V) Low fixed-pattern noise and lag No burn-in and no image distortion Blooming suppression structure Built-in output amplifier Built-in pulse mix circuit Variable electronic shutter (1/50 to 1/10 000 s) Normal or mirror image output available from common output pin Compatible with CCIR standard Package : 14-pin half-pitch WDIP [Plastic] (WDIP014-P-0400A) Row space : 10.16 mm
OD 4 ØH2B 5 ØH2 6 ØH1B 7
(WDIP014-P-0400A)
PRECAUTIONS
The exit pupil position of lens should be more than 20 mm from the top surface of the CCD. Refer to "PRECAUTIONS FOR CCD AREA SENSORS" for details.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contac...
Similar Datasheet