Document
LZ2315A/LZ2316AR
LZ2315A/ LZ2316AR
DESCRIPTION
The LZ2315A/LZ2316AR are 1/3-type (6.0 mm) solid-state image sensors that consist of PN photodiodes and CCDs (charge-coupled devices) driven by dual-power-supply. With approximately 270 000 pixels (542 horizontal x 492 vertical), the sensor provides a stable high-resolution color (LZ2315A)/ B/W (LZ2316AR) normal or mirror image.
Dual-power-supply (5 V/12 V) Operation 1/3-type CCD Area Sensors with 270 k Pixels
PIN CONNECTIONS
16-PIN SHRINK-PITCH WDIP TOP VIEW
ØRS 1 RD 2 GND 3 OS 4
16 T1 15 OFD 14 ØTG 13 ØV2 12 ØV1 11 ØV4 10 ØV3 9 ØH1
FEATURES
• Number of effective pixels : 512 (H) x 492 (V) • Number of optical black pixels – Horizontal : 2 front and 28 rear • Pixel pitch : 9.6 µm (H) x 7.5 µm (V) • Mg, G, Cy, and Ye complementary color filters (For LZ2315A) • Low fixed-pattern noise and lag • No burn-in and no image distortion • Blooming suppression structure • Built-in output amplifier • Built-in pulse mix circuit • Built-in overflow drain voltage circuit and reset gate voltage circuit • Variable electronic shutter (1/60 to 1/10 000 s) • Normal or mirror image output available from common output pin • Compatible with NTSC standard (LZ2315A)/ EIA standard (LZ2316AR) • Package : 16-pin shrink-pitch WDIP [Ceramic] (WDIP016-N-0500C) Row space : 12.70 mm
OD 5 ØH2B 6 ØH2 7 ØH1B 8
(WDIP016-N-0500C)
PRECAUTIONS
• The exit pupil position of lens should be more than 25 mm (LZ2315A)/20 mm (LZ2316AR) from the top surface of the CCD. • Refer to "PRECAUTIONS FOR CCD AREA SENSORS" for details.
COMPARISON TABLE
TV standard Characteristics LZ2315A NTSC standard (Color) LZ2316AR EIA standard (B/W)
Refer to each following specification.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
LZ2315A/LZ2316AR
PIN DESCRIPTION
SYMBOL RD OD OS ØRS ØV1, ØV2, ØV3, ØV4 ØH1, ØH2, ØH1B, ØH2B ØTG OFD GND T1 PIN NAME Reset transistor drain Output transistor drain Output signals Reset transistor clock Vertical shift register clock Horizontal shift register clock Transfer gate clock Overflow drain Ground Test pin 1 2 3 1 NOTE
NOTES :
1. ØRS, OFD : Use the circuit parameter indicated in "SYSTEM CONFIGURATION EXAMPLE", and do not connect to DC voltage directly. When not using electronic shutter, connect OFD to GND through a 0.1 µF capacitor and a 1 M$ resistor. 2. ØV1-ØV4 : Input the clock through a 0.1 µF capacitor. 3. ØTG : Use the circuit parameter indicated in "SYSTEM CONFIGURATION EXAMPLE".
ABSOLUTE MAXIMUM RATINGS
PARAMETER Output transistor drain voltage Reset transistor drain voltage Overflow drain voltage Test pin, T1 Reset gate clock voltage Vertical shift register clock voltage Horizontal shift register clock voltage Transfer gate clock voltage Storage temperature.