DatasheetsPDF.com

DAC701 Dataheets PDF



Part Number DAC701
Manufacturers Burr-Brown Corporation
Logo Burr-Brown Corporation
Description Monolithic 16-Bit DIGITAL-TO-ANALOG CONVERTERS
Datasheet DAC701 DatasheetDAC701 Datasheet (PDF)

® DAC 701 DAC 702 DAC 703 DAC701 DAC702 DAC703 Monolithic 16-Bit DIGITAL-TO-ANALOG CONVERTERS FEATURES q VOUT AND IOUT MODELS q HIGH ACCURACY: Linearity Error ±0.0015% of FSR max Differential Linearity Error ±0.003% of FSR max q MONOTONIC (at 15 bits) OVER FULL SPECIFICATION TEMPERATURE RANGE q PIN-COMPATIBLE WITH DAC70, DAC71, DAC72 q DUAL-IN-LINE PLASTIC AND HERMETIC CERAMIC AND SOIC Digital inputs are complementary binary coded and are TTL-, LSTTL-, 54/74C- and 54/74HC-compatible over t.

  DAC701   DAC701


Document
® DAC 701 DAC 702 DAC 703 DAC701 DAC702 DAC703 Monolithic 16-Bit DIGITAL-TO-ANALOG CONVERTERS FEATURES q VOUT AND IOUT MODELS q HIGH ACCURACY: Linearity Error ±0.0015% of FSR max Differential Linearity Error ±0.003% of FSR max q MONOTONIC (at 15 bits) OVER FULL SPECIFICATION TEMPERATURE RANGE q PIN-COMPATIBLE WITH DAC70, DAC71, DAC72 q DUAL-IN-LINE PLASTIC AND HERMETIC CERAMIC AND SOIC Digital inputs are complementary binary coded and are TTL-, LSTTL-, 54/74C- and 54/74HC-compatible over the entire temperature range. Outputs of 0 to +10V, ±10V, 0 to –2mA, and ±1mA are available. These D/A converters are packaged in hermetic 24-pin ceramic side-brazed or molded plastic. The DIP-packaged parts are pin-compatible with the voltage and current output DAC71 and DAC72 model families. The DAC702 is also pin-compatible with the DAC70 model family. In addition, the DAC703 is offered in a 24-pin SOIC package for surface mount applications. DESCRIPTION The DAC70X family comprise of complete 16-bit digital-to-analog converters that includes a precision buried-zener voltage reference and a low-noise, fastsettling output operational amplifier (voltage output models), all on one small monolithic chip. A combination of current-switch design techniques accomplishes not only 15-bit monotonicity over the entire specified temperature range, but also a maximum end-point linearity error of ±0.0015% of full-scale range. Total full-scale gain drift is limited to ±10ppm/°C maximum (LH and CH grades). Digital Inputs 16-Bit Ladder Resistor Network And Current Switches Reference Circuit Reference Output Common Summing Junction Output Voltage Models Only Gain Adjust +V CC –V CC V DD International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111 • Twx: 910-952-1111 Internet: http://www.burr-brown.com/ • FAXLine: (800) 548-6133 (US/Canada Only) • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132 ® © 1983 Burr-Brown Corporation PDS-494M 1 DAC701, 702, 703 Printed in U.S.A. March, 1998 SPECIFICATIONS At +25°C and rated power supplies, unless otherwise noted. DAC702/703J PARAMETER INPUT DIGITAL INPUT Resolution Digital Inputs (1) VIH VIL IIH, VI = +2.7V IIL, VI = +0.4V 16 +2.4 –1.0 –0.35 +VCC +0.8 +40 –0.5 T T T T T T T T T T T T T T T T T T T T T T T T Bits V V µA mA MIN TYP MAX DAC701/702/703K MIN TYP MAX DAC701/702/703B, S MIN TYP MAX DAC701/702/703L, C MIN TYP MAX UNITS TRANSFER CHARACTERISTICS ACCURACY(2) Linearity Error(4) Differential Linearity Error(4) Differential Linearity Error at Bipolar Zero (DAC702/703)(4) Gain Error(5) Zero Error(5, 6) Monotonicity Over Spec. Temp Range DRIFT (over specification temperature range) Total Error Over Temperature Range (all models)(7) Total Full Scale Drift: DAC701 DAC702/703 Gain Drift (all models) Zero Drift: DAC701 DAC702/703 Differential Linearity Over Temp.(4) Linearity Error Over Temp.(4) SETTLING TIME (to ±0.003% of FSR)(8) DAC701/703 (VOUT Models) Full Scale Step, 2kΩ Load 1LSB Step at Worst-Case Code(9) Slew Rate DAC702 (IOUT Models) Full Scale Step (2mA), 10 to 100Ω Load 1kΩ Load OUTPUT VOLTAGE OUTPUT MODELS DAC701 (CSB Code) DAC703 (COB Code) Output Current Output Impedance Short Circuit to Common Duration CURRENT OUTPUT MODELS DAC702 (COB Code)(10) Output Impedance(10) Compliance Voltage ±0.0015 ±0.003 ±0.006 ±0.012 T T ±0.003 ±0.006 T T T T ±0.00075 ±0.0015 ±0.0015 ±0.003 % of FSR(3) % of FSR ±0.07 ±0.05 13 ±0.30 ±0.10 14 ±0.003 T T ±0.006 ±0.15 T T ±0.0015 ±0.05 T ±0.003 ±0.10 T 15 T T T T T T % of FSR % % of FSR Bits ±0.08 ±10 ±10 ±10 T T T T ±2.5 T ±0.15 ±30 ±25 ±25 ±5 ±12 +0.009, –0.006 ±0.006 ±0.05 ±8.5 ±7 ±7 ±1.5 ±4 ±0.10 ±18 ±15 ±15 ±3 ±10 T T ±6 T ±5 T ±2.5 T ±13 T ±10 T ±5 +0.006, –0.003 ±0.003 % of FSR ppm of FSR/°C ppm of FSR/°C ppm/°C ppm of FSR/°C ppm of FSR/°C % of FSR ±30 ±5 ±15 ±0.012 ±0.012 T % of FSR 4 2.5 10 T T T 8 T T T T T T T T µs µs V/µs 350 1 T T 1000 3 T T T T T T T T ns µs ±5 ±10 T 0.15 Indefinite 0 to +10 T T T T T T T T T T T T V V mA Ω ±1 2.45 ±2.5 T T T T T T T T T mA kΩ V ® DAC701, 702, 703 2 SPECIFICATIONS (CONT) At +25°C and rated power supplies, unless otherwise noted. DAC702/703J PARAMETER REFERENCE VOLTAGE Voltage Source Current Available for External Loads Temperature Coefficient Short Circuit to Common Duration POWER SUPPLY REQUIREMENTS Voltage: +VCC –VCC VDD Current (No Load): DAC702 (IOUT Models) +VCC –VCC VDD DAC701/703 (VOUT Models) +VCC –VCC VDD Power Dissipation: (VDD = +5.0V)(11) DAC702 DAC701/703 Power Supply Rejection: +VCC –VCC VDD TEMPERATURE RANGE Specification: B, C Grades S Grades J, K, L Grades Storage: Ceramic Plastic, SOIC –25 –55 0 –60 +70 +100 T –60 T T +150 T T +85 +125 T T 0 T T +70 T °C °C °C °C °C 13.5 13.5 +4.5 15 15 +5 16.5 16.5 +16.5 T T T T T T T T T T T T T T T T T T T T T T T T T T T V V V MIN TYP +.


DAC600 DAC701 DAC702


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)