High-Output Drive Rail-to-Rail Op Amp Preliminary Information
MIC7300
Micrel
MIC7300
High-Output Drive Rail-to-Rail Op Amp Preliminary Information
General Description
The MIC7300 ...
Description
MIC7300
Micrel
MIC7300
High-Output Drive Rail-to-Rail Op Amp Preliminary Information
General Description
The MIC7300 is a high-performance CMOS operational amplifier featuring rail-to-rail input and output with strong output drive capability. It is able to source and sink in excess of 80mA into large capacitive loads. The input common-mode range extends beyond the rails by 300mV, and the output voltage typically swings to within 150µV of both rails when driving a 100kΩ load. The amplifier operates from 2.2V to 10V and is fully specified at 2.2V, 3V, 5V, and 10V. Gain bandwidth and slew rate are 500kHz and 0.5V/µs, respectively. The MIC7300 is available in Micrel’s IttyBitty™ SOT-23-5 package for space-conscious circuits and in high-power MM8™ 8-lead MSOP for improved heat dissipation in higher power applications.
Features
Small footprint SOT-23-5 and power MSOP-8 packages >80mA peak output sink and source with 5V supply Drives large capacitive loads (6000pF with 10V supply) Guaranteed 2.2V, 3V, 5V, and 10V performance 500kHz gain-bandwidth product 0.01% total harmonic distortion at 1kHz (10V, 2kΩ) 1mA typical power supply current at 5V
Applications
Battery-powered instrumentation PCMCIA, USB peripherals Portable computers and PDAs
Pin Configurations
IN+
3
Ordering Information
Part Number
V– OUT
2 1
Temperature Range –40°C to +85°C –40°C to +85°C
Package SOT-23-5 MSOP-8
MIC7300BM5
Part Identification
MIC7300BMM
A17
4 5
IN–
V+
SOT-23-5 (M5)
F...
Similar Datasheet