Rail-to-Rail Dual Op Amp
MIC7122
Micrel
MIC7122
Rail-to-Rail Dual Op Amp Preliminary Information
General Description
The MIC7122 is a dual hig...
Description
MIC7122
Micrel
MIC7122
Rail-to-Rail Dual Op Amp Preliminary Information
General Description
The MIC7122 is a dual high-performance CMOS operational amplifier featuring rail-to-rail inputs and outputs. The input common-mode range extends beyond the rails by 300mV, and the output voltage swings to within 150µV of both rails when driving a 100kΩ load. The amplifiers operate from 2.2V to 15V and are fully specified at 2.2V, 5V, and 15V. Gain bandwidth and slew rate are 750kHz and 0.7V/µs, respectively at 2.2V supply. The MIC7122 is available in the MM8™ 8-lead MSOP package.
Features
Small footprint MSOP-8 package 350µA supply current per op amp at 2.2V supply Guaranteed 2.2V, 5V, and 15V performance 750kHz gain-bandwidth product at 2.2V supply 0.01% total harmonic distortion at 1kHz (15V, 2kΩ) Drives 200pF at 5V and greater supply voltages
Applications
Battery-powered instrumentation PCMCIA, USB peripherals Portable computers and PDAs
Ordering Information
Part Number MIC7122BMM Temperature Range –40°C to +85°C Package MSOP-8
Pin Configuration
OUT A 1 IN A– 2 8 7 6 5 V+ OUT B INB– INB+
1 2 A 3 B 4
8 7 6 5
IN A+ 3 V– 4
MSOP-8 (MM)
Pin Description
Pin Number 1/7 2/6 3/5 4 8
MM8 is a trademark of Micrel, Inc. Micrel, Inc. 1849 Fortune Drive San Jose, CA 95131 USA tel + 1 (408) 944-0800 fax + 1 (408) 944-0970 http://www.micrel.com
Pin Name OUTA / OUTB INA– / INB– INA+ / INB+ V– V+
Pin Function Amplifier Outputs Inverting Inputs Noninverting ...
Similar Datasheet