MIC5231
Micrel
MIC5231
Micropower µCap LDO Regulator Preliminary Information
General Description
The MIC5231 µCap low...
MIC5231
Micrel
MIC5231
Micropower µCap LDO
Regulator Preliminary Information
General Description
The MIC5231 µCap low-dropout voltage
regulator is intended for low-output-current biasing applications. It features extremely low ground current, not greater than 4µA under all load and temperature conditions, making it efficient and ideal for keep-alive applications in devices such as notebook computers. The MIC5231 offers better than 2% initial accuracy and low dropout (typically 150mV at 10mA output current). An output capacitor is not required for stable operation, decreasing cost and board space. Tiny ceramic chip capacitors may be used to improve transient response. The MIC5231 also features a control pin which allows the
regulator to be shut down when not required. Its shutdownstate draws zero current, benefitting battery-powered applications. The MIC5231 is available in fixed output voltages of 2.75V, 3.0V, 3.3V and 5V in the small SOT-23-5 IttyBitty™ package. Contact Micrel for other voltage options.
Features
Extremely low quiescent current—only 0.65µA No output capacitor requirement Stable with ceramic or tantalum capacitors IttyBitty™ SOT-23-5 surface-mount package 10mA output drive Low 150mV at 10mA dropout voltage Tight load and line regulation Low temperature coefficient Logic-level enable input Real time clocks SRAM backup Cellular telephones Laptop, notebook and palmtop computers Battery-powered equipment Bar code scanners SMPS p...