8-Channel/4-Channel Fault-Protected Analog Multiplexers
8-Channel/4-Channel Fault-Protected Analog Multiplexers
ADG508F/ADG509F
FEATURES
All switches off with power supply off...
Description
8-Channel/4-Channel Fault-Protected Analog Multiplexers
ADG508F/ADG509F
FEATURES
All switches off with power supply off Analog output of on channel clamped within power
supplies if an overvoltage occurs Latch-up proof construction Low on resistance (270 Ω typical) Fast switching times
tON: 230 ns maximum tOFF: 130 ns maximum Low power dissipation (3.3 mW maximum) Fault and overvoltage protection (−40 V to +55 V) Break-before-make construction TTL and CMOS compatible inputs
APPLICATIONS
Existing multiplexer applications (both fault-protected and nonfault-protected)
New designs requiring multiplexer functions
GENERAL DESCRIPTION
The ADG508F and ADG509F are CMOS analog multiplexers, with the ADG508F comprising eight single channels and the ADG509F comprising four differential channels. These multiplexers provide fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both device and signal source protection is provided in the event of an overvoltage or power loss. The multiplexer can withstand continuous overvoltage inputs from −40 V to +55 V. During fault conditions with power supplies off, the multiplexer input (or output) appears as an open circuit and only a few nanoamperes of leakage current will flow. This protects not only the multiplexer and the circuitry driven by the multiplexer, but also protects the sensors or signal sources that drive the multiplexer. The ADG508F switches one of eight inputs to a common output as determined by the 3-bit b...
Similar Datasheet