LC2MOS Latchable 4-/8-Channel High Performance Analog Multiplexers
a
FEATURES 44 V Supply Maximum Ratings V SS to VDD Analog Signal Range Low On Resistance (60 ⍀ typ) Low Power Consumptio...
Description
a
FEATURES 44 V Supply Maximum Ratings V SS to VDD Analog Signal Range Low On Resistance (60 ⍀ typ) Low Power Consumption (1.6 mW max) Low Charge Injection (<4 pC typ) Fast Switching Break-Before-Make Switching Action Plug-In Replacement for DG428/DG429 APPLICATIONS Automatic Test Equipment Data Acquisition Systems Communication Systems Avionics and Military Systems Microprocessor Controlled Analog Systems Medical Instrumentation
LC2MOS Latchable 4-/8-Channel High Performance Analog Multiplexers ADG428/ADG429
FUNCTIONAL BLOCK DIAGRAMS
ADG428
S1 S1A DA S4A D S1B DB S8 S4B
ADG429
DECODERS/DRIVERS LATCHES WR A2 A1 A0 EN RS WR
DECODERS/DRIVERS LATCHES RS A1 A0 EN
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG428 and ADG429 are monolithic CMOS analog multiplexers comprising eight single channels and four differential channels respectively. On-chip address and control latches facilitate microprocessor interfacing. The ADG428 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. The ADG429 switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF. All the control inputs, address and enable inputs are TTL compatible over the full specified operating temperature range. This makes the part suitable for bus-controlled systems such as data ...
Similar Datasheet