Data Sheet 27621.30A‡
3161
HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS
This Hall-effect switch is a monolithic integrat...
Data Sheet 27621.30A‡
3161
HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS
This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85°C. The unipolar switching characteristic makes this device ideal for use with a simple bar or rod magnet. The A3161ELT and A3161EUA are identical except for package. Each device includes a voltage
regulator for operation with supply voltages of 3.5 to 25 volts, reverse battery protection diode, quadratic Hall-voltage generator, temperature compensation circuitry, small-signal amplifier, Schmitt trigger, and a constant-current open-collector output. Noise radiation is limited by control of the output current slew rate. Two package styles provide a magnetically optimized package for most applications. Suffix ‘LT’ is a miniature SOT-89/TO-243AA
transistor package for surface-mount applications; suffix ‘UA’ is a threelead ultra-mini SIP for through-hole mounting.
V
X
CC
1
2
3
GROUND
Dwg. PH-003-3
OUTPUT
SUPPLY
FEATURES and BENEFITS
I I I I I I I I I
Pinning is shown viewed from branded side.
ABSOLUTE MAXIMUM RATINGS at TA = +25°C
Supply Voltage, VCC Continuous ................................. 28 V Surge (tw ≤ 100 ms) .................... 40 V Reverse Battery Voltage, VRCC Continuous ................................ -25 V Surge (tw ≤ 100 ms) ................... -40 V Magnetic Flux Density, B ....... Unlimited Output OFF Voltage, VOUT .............. 28 V Operating Temperatur...