10 Watts AA10U
Astec Conventional Power
10 Watts
AA10U
Total Power: Input Voltages: No. of Outputs:
10 Watts 12V, 24V or 48V Single,...
Description
Astec Conventional Power
10 Watts
AA10U
Total Power: Input Voltages: No. of Outputs:
10 Watts 12V, 24V or 48V Single, Dual
Electrical Specs
Input
Input range Input capacitance No load input power Input reflected ripple (P-P) Efficiency 9 to 36 VDC; 18 to 75 VDC 48 models 1.5uF typical 24 models 2.7uF typical 150mW typical 48 Models 24 Models 82% (typ) 4mA 10mA
(see Note 2)
Output
Voltage tolerance
Special Features
Unencapsulated Wide 4:1 input range 1 year warranty 1.0" x 2.0" x 0.38" case Meets EN55022A for conducted noise
Line regulation Load regulation
Noise/ripple Short circuit protection Overvoltage protection Transient response Switching frequency Temperature coefficient
±1.0% (main); ±2.0% (aux) (factory set-point) +0.5% max (main); ±0.5% (aux) ±0.5% (10% load to full load (singles)) ±1.0% (10% load to full load (duals)) 1% p-p (See Note 1) Continuous Power Cycle Zener clamp 1mS 50% Step load change to within 1% Vout All models 380kHz except 150S & 150D Models 300kHz (typ.) ±0.02%/°C max.
Environmental
Operating ambient temperature range: -40°C to +75°C (no derating) Baseplate: 105°C Max. Storage Temperature: -55°C to +125°C Humidity: 5% to 95% (non-condensing) EMI/RFI Shielding: Five-Sided MTBF: 361,000 hours (MIL-HDBK-217)
Isolation
I/O isolation Insulation resistance Insulation capacitance Fuse 1500 VDC min 50 M ohm 220pF .024 - 2.25A/250V 048 - 1A/250V
Safety
UL TUV UL 1950 Recognized CAN22.2-950 Recognized EN60950 Certified
64
America’s (U...
Similar Datasheet