DatasheetsPDF.com

ADP3302 Dataheets PDF



Part Number ADP3302
Manufacturers Analog Devices
Logo Analog Devices
Description High Accuracy anyCAP Adjustable 200 mA Low Dropout Linear Regulator
Datasheet ADP3302 DatasheetADP3302 Datasheet (PDF)

a FEATURES High Accuracy: ؎0.8% Ultralow Dropout Voltage: 120 mV @ 100 mA Typical Requires only CO = 0.47 ␮ F for Stability anyCAP™ = Stable with All Types of Capacitors Current and Thermal Limiting Low Noise Dropout Detector Multiple Voltage Options Thermally Enhanced SO-8 Package APPLICATIONS Cellular Telephones Notebook and Palmtop Computers Battery Powered Systems Portable Instruments High Efficiency Linear Regulators High Precision anyCAP™ Dual Low Dropout Linear Regulator ADP3302 FUNCTION.

  ADP3302   ADP3302


Document
a FEATURES High Accuracy: ؎0.8% Ultralow Dropout Voltage: 120 mV @ 100 mA Typical Requires only CO = 0.47 ␮ F for Stability anyCAP™ = Stable with All Types of Capacitors Current and Thermal Limiting Low Noise Dropout Detector Multiple Voltage Options Thermally Enhanced SO-8 Package APPLICATIONS Cellular Telephones Notebook and Palmtop Computers Battery Powered Systems Portable Instruments High Efficiency Linear Regulators High Precision anyCAP™ Dual Low Dropout Linear Regulator ADP3302 FUNCTIONAL BLOCK DIAGRAM (1/2 IS SHOWN) ADP3302 OUT CC R1 IN THERMAL PROTECTION Q2 SD BANDGAP REF GND DRIVER Q1 ERR GM R2 EOUT 2 GENERAL DESCRIPTION 330kΩ VOUT1 0.47µF The ADP3302 is a member of the ADP330X family of precision micropower low dropout anyCAP™ regulators. The ADP3302 contains two fully independent 100 mA regulators with separate shutdown and merged error outputs. It features 1.4% overall output accuracy and very low, 120 mV typical, dropout voltage. The ADP3302 has a wide input voltage range from ؉3 V to ؉12 V. It features an error flag that signals when either of the two regulators is about to lose regulation. It has short circuit current protection as well as thermal shutdown. The ADP3302’s enhanced lead frame design allows for a maximum power dissipation of 630 mW @ +70°C ambient temperature and 1.0 W at room temperature without any external heat sink. anyCAP™ is a trademark of Analog Devices, Inc. VIN 0.47µF ERR 5 8 IN IN OUT1 1 ADP3302 3 GND OUT2 4 SD2 6 VOUT2 0.47µF SD1 7 ON OFF Figure 1. Application Circuit REV. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 World Wide Web Site: http://www.analog.com Fax: 617/326-8703 © Analog Devices, Inc., 1997 ADP3302–SPECIFICATIONS noted) Parameter GROUND CURRENT GROUND CURRENT IN DROPOUT DROPOUT VOLTAGE Symbol IGND IGND VDROP (@ TA = –20؇C to +85؇C, VIN = 7 V, CIN = 0.47 ␮F, COUT = 0.47 ␮F, unless otherwise 1 Conditions IL1 = IL2 = 100 mA IL1 = IL2 = 0.1 mA VIN = 2.5 V IL1 = IL2 = 0.1 mA VOUT ≤ 98% of VO, Nominal IL = 100 mA IL = 10 mA IL = 1 mA ON OFF 0 < VSD < 5 V 5 ≤ VSD ≤ 12 V, @ VIN = 12 V VSDI = VSD2 = 0, TA = +25°C, @ VIN =12 V VSDI = VSD2 = 0, TA = +85°C, @ VIN =12 V TA = +85°C, @ VIN = 12 V TA = +25°C, @ VIN = 12 V VEO = 5 V ISINK = 400 µA VIN = Nominal VOUT +1 V VIN = 12 V, IL = 100 mA T = 10 ms f = 10 Hz–100 kHz, @ TA = +25°C VOUT = 3.3 V VOUT = 5 V Min Typ 2 0.4 1.0 Max 4 0.8 2 Units mA mA mA 0.12 0.05 0.02 2.0 0.9 0.9 0 0.2 0.1 0.05 0.3 1 22 1 5 12 2 13 V V V V V µA µA µA µA µA µA µA V mA %/W SHUTDOWN THRESHOLD SHUTDOWN PIN INPUT CURRENT GROUND CURRENT IN SHUTDOWN MODE VTHSD ISDIN IQ 0 OUTPUT CURRENT IN SHUTDOWN MODE ERROR PIN OUTPUT LEAKAGE ERROR PIN OUTPUT “LOW” VOLTAGE PEAK LOAD CURRENT THERMAL REGULATION OUTPUT NOISE IOSD IEL VEOL ILDPK ∆ VO VO 0.15 200 0.05 0.3 VNOISE 75 110 µV rms µV rms NOTES 1 Ambient temperature of ؉85°C corresponds to a typical junction temperature of +125°C. Specifications subject to change without notice. T = –20؇C to +85؇C, V = 3.3 V, C = 0.47 ␮F, C ADP3302-3.0–SPECIFICATIONS (@ otherwise noted) A IN IN OUT = 0.47 ␮F, unless Max 3.024 Units V Parameter OUTPUT VOLTAGE Symbol VOUT1 or VOUT2 Conditions VIN = 3.3 V to 12 V IL = 0.1 mA to 100 mA TA= +25°C VIN = 3.3 V to 12 V IL = 0.1 mA to 100 mA VIN = 3.3 V to 12 V TA = +25°C, IL = 0.1 mA IL = 0.1 mA to 100 mA TA = +25°C IL = 0.1 mA to 100 mA TA = +25°C Min 2.976 Typ 3 2.958 3 0.024 0.030 1 3.042 V mV/V mV/mA µV/mA LINE REGULATION LOAD REGULATION CROSS REGULATION ∆ VO ∆ V IN ∆ VO ∆I L ∆ V 01 ∆I L2 ∆ V 02 or ∆I L1 Specifications subject to change without notice. –2– REV. 0 ADP3302-3.2–SPECIFICATIONS Parameter OUTPUT VOLTAGE Symbol VOUT1 or VOUT2 (@ TA = –20؇C to +85؇C, VIN = 3.5 V, CIN = 0.47 ␮F, COUT = 0.47 ␮F, unless otherwise noted) Min 3.174 Typ 3.2 Max 3.226 ADP3302 Units V Conditions VIN = 3.5 V to 12 V IL = 0.1 mA to 100 mA TA= +25°C VIN = 3.5 V to 12 V IL = 0.1 mA to 100 mA VIN = 3.5 V to 12 V TA = +25°C, IL = 0.1 mA IL = 0.1 mA to 100 mA TA = +25°C IL = 0.1 mA to 100 mA TA = +25°C 3.155 3.2 0.026 0.032 1 3.245 V mV/V mV/mA µV/mA LINE REGULATION LOAD REGULATION CROSS REGULATION ∆ VO ∆ V IN ∆ VO ∆I L ∆ V 01 ∆I L2 or Specifications subject to change without notice. ∆ V 02 ∆I L1 OUT = 0.47 ␮F, unless T = –20؇C to +85؇C, V = 3.6 V, C = 0.47 ␮F, C ADP3302-3.3–SPECIFICATIONS (@ otherwise noted) A IN IN Parameter OUTPUT VOLTAGE Symbol VOUT1 or VOUT2 Conditions VIN = 3.6 V to 12 V IL = 0.1 mA to 100 mA TA= +25°C VIN = 3.6 V to 12 V IL = 0.1 mA to 100 mA VIN = 3.6 V to 12 V TA = +25°C, IL = 0.1 mA IL = 0.1 mA to 100 mA TA = .


ADP3301 ADP3302 ADP3303


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)