High-Performance LED(Single-Mode Datacom)
PRODUCT INFORMATION
880nm
1A225
High-Performance LED
Single-Mode Datacom
Compared with lasers and ELEDs, this device...
Description
PRODUCT INFORMATION
880nm
1A225
High-Performance LED
Single-Mode Datacom
Compared with lasers and ELEDs, this device can reduce device costs in single-mode Ethernet networks. And since it’s packaged in a hermeti-cally sealed can, it achieves high reliability even in harsh operating environments.
Optical and Electrical Characteristics
PARAMETER SYMBOL MIN. TYP . MAX. UNIT
(25° C Case Temperature) TEST CONDITION
Fiber-Coupled Power
(Fig. 1, 2,& 3) (Table 1)
Pfiber tr, tf fc
p
2.0
2.5 7 50 10
W ns MHz 900 nm nm 2.2 20 V A pF
IF =50 mA
(Note 1) Fiber: 10/125 m Single Mode NA=0.11
Rise and Fall Time
(10-90%)
IF =50 mA
(no bias)
Bandwidth
(3dBel )
IF =50 mA IF =50 mA IF =50 mA IF =50 mA VR=1V
Peak Wavelength Spectral Width (FWHM) Forward Voltage (Fig.5) Reverse Current Capacitance
860
880 50 2.0
⌬ VF IR C
250
VR= 0V, f=1 MHz
Note 1: Measured at the exit of 100 meters of fiber.
Absolute Maximum Ratings
Ø4.7 Ø1.5 0.6
PARAMETER
SYMBOL
LIMIT
Storage Temperature Operating Temperature (derating: Fig.4) Electrical Power Dissipation (derating: Fig.4)
Tstg Top Ptot IF IFRM VR Tsld
-55 to +125Њ C -55 to +125Њ C 130 mW 60 mA 100 mA 1.5 V 260ЊC
3.7
14
Continuous Forward Current (fр10 kHz)
0.4
Peak Forward Current (duty cycle р50%, fу1 MHz) Reverse Voltage
All dimensions in mm
CASE
CATHODE
ANODE
Soldering Temperature (2mm from the case for 10 sec)
2.5 5.4 BOTTOM VIEW
The diode chip is isolated from the case.
Thermal Characteristics
PARAMETER SYMBOL ...
Similar Datasheet