High Accuracy 61 g to 65 g Single Axis iMEMS Accelerometer with Analog Input
a
High Accuracy ؎1 g to ؎5 g Single Axis iMEMS® Accelerometer with Analog Input ADXL105*
FUNCTIONAL BLOCK DIAGRAM
VDD
...
Description
a
High Accuracy ؎1 g to ؎5 g Single Axis iMEMS® Accelerometer with Analog Input ADXL105*
FUNCTIONAL BLOCK DIAGRAM
VDD
FEATURES Monolithic IC Chip 2 mg Resolution 10 kHz Bandwidth Flat Amplitude Response (؎ 1%) to 5 kHz Low Bias and Sensitivity Drift Low Power 2 mA Output Ratiometric to Supply User Scalable g Range On-Board Temperature Sensor Uncommitted Amplifier Surface Mount Package +2.7 V to +5.25 V Single Supply Operation 1000 g Shock Survival APPLICATIONS Automotive Accurate Tilt Sensing with Fast Response Machine Health and Vibration Measurement Affordable Inertial Sensing of Velocity and Position Seismic Sensing Rotational Acceleration
TOUT
TEMP SENSOR
ADXL105
UNCOMMITTED AMPLIFIER
ST X SENSOR
COM
COM
AOUT
VMID VNIN
VIN
UCAOUT
GENERAL DESCRIPTION
The ADXL105 is a high performance, high accuracy and complete single-axis acceleration measurement system on a single monolithic IC. The ADXL105 offers significantly increased bandwidth and reduced noise versus previously available micromachined devices. The ADXL105 measures acceleration with a full-scale range up to ± 5 g and produces an analog voltage output. Typical noise floor is 225 µg√Hz allowing signals below 2 m g to be resolved. A 10 kHz wide frequency response enables vibration measurement applications. The product exhibits significant reduction in offset and sensitivity drift over temperature compared to the ADXL05.
The ADXL105 can measure both dynamic accelerations, (typical of vibration) or static a...
Similar Datasheet