Full Bridge PWM Control DC Motor Driver
Full Bridge PWM Control DC Motor Driver ICs SI-5300
Features
● P-ch MOS for high side and N-ch MOS for low side in one ...
Description
Full Bridge PWM Control DC Motor Driver ICs SI-5300
Features
● P-ch MOS for high side and N-ch MOS for low side in one package ● Enable to drive DC±5V ● Possible to drive a motor at the LS-TTL, C-MOS Logic level ● Guarantee Tj=Tch=150°C ● Built-in over current protection and thermal shut down circuits ● Built-in diagnosis function to monitor and signal the state of each protection circuits ● Built-in vertical current prevention circuits (Dead time is defined internally.) ● No insulator required for Sanken's original package (SPM package)
Absolute Maximum Ratings
(Ta = 25ºC)
Parameter
Symbol
Ratings
Unit Conditions
Motor supply voltage
VM
40 V
IN1 –0.3 to 7
V
Input terminal voltage
IN2
–0.3 to 7
V
PWM
–0.3 to 7
V
Output current
IO IO (p-p)
±5 ±17
A A PW 1ms, Duty 50%
PWM control frequency
fPWM
20 kHz Duty=20% to 80%
Forward reverse rotation switch frequency* fCW 500 Hz
Operating temperature
TOP
–40 to +85
ºC
Junction and ...
Similar Datasheet