LOW EMI CLOCK GENERATOR
DATASHEET
LOW EMI CLOCK GENERATOR
ICS180-01
Description
The ICS180-01 generates a low EMI output clock from a clock o...
Description
DATASHEET
LOW EMI CLOCK GENERATOR
ICS180-01
Description
The ICS180-01 generates a low EMI output clock from a clock or crystal input. The device uses IDT’s proprietary mix of analog and digital Phase Locked Loop (PLL) technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB.
The ICS180-01 offers down spread selection of -1.25% and -3.75%. Refer to the MK1714-01/02 for the widest selection of input frequencies and multipliers.
IDT offers a complete line of EMI reducing clock generators. Consult us when you need to remove crystals and oscillators from your board.
Block Diagram
Features
Pin and function compatible to Cypress W180-01 Packaged in 8-pin SOIC Provides a spread spectrum output clock Accepts a clock input and provides same frequency
dithered output
Input frequency of 8 to 28 MHz Peak reduction by 7dB - 14dB typical on 3rd - 19th
odd harmonics
Spread percentage selection for -1.25% a...
Similar Datasheet