Axial Lead Transient Voltage Suppressors
15KP Series
Reverse Voltage: 17 to 280 V Peak Pulse Power: 15000 W
Axial Lead Transient Voltage Suppressors
Features
...
Description
15KP Series
Reverse Voltage: 17 to 280 V Peak Pulse Power: 15000 W
Axial Lead Transient Voltage Suppressors
Features
● Glass passivated chip
● 15000 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 %
● Low leakage ● Uni and Bidirectional unit ● Excellent clamping capability ● Very fast response time ● RoHS compliant
Mechanical Data
● Case: Molded plastic ● Epoxy: UL 94V-0 rate flame retardant
● Lead: Solderable per MIL-STD-202, method 208 guranteed
● Polarity: Color band denotes cathode end except Bipolar
● Mounting position: Any
R-6/P600
1.000 [25.40] MIN
[ ]0.360 9.14
0.340 8.64
1.000 [25.40] MIN
DIA.
[ ]0.052 1.32
0.048 1.22
DIA.
[ ]0.360 9.14
0.340 8.64 Dimensions : inch [ mm ]
Maximum Ratings(TA=25℃ unless otherwise noted)
Parameter
Symbol
Value
Peak power dissipation with a 10/1000μs waveform(1)
PPP
15000
Peak pulse current with a 10/1000μs waveform(1)
IPP See Next Table
Power dissipation on infinite heatsink at TL = 75 °C
PD
8.0
Peak forward surge current, 8.3 ms single half sinewave unidirectional only(2)
IFSM
500
Operating junction and storage temperature range
TJ, TSTG –55 to +175
Note:
(1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1
(2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
Unit W A W
A
°C
Revision: F Jun-07-2018
www.anova-semi.com
P. 1
15KP Series
Peak Pulse Derating in Percentage of Peak Po...
Similar Datasheet